Water Right Impression Plus Series Installation Instructions & Owner's Manual - Quick Reference Guide:
1900 Prospect Court • Appleton, WI 54914
Phone: 920-739-9401 • Fax: 920-739-9406
MANUAL
REGENERATION
NOTE: If you need
to initiate a manual
regeneration, either immediately, or the
same night at the preprogrammed time
for regeneration (typically 12:00 AM),
complete the following steps .
For Immediate Regeneration:
Press and hold
regen
until valve motor starts (typically 3 seconds) .
For Regeneration the same night:
Press and release
regen
(notice that flashing “REGEN TODAY” appears) .
ERROR
If the display toggles between “Error”
and an error code (i .e . a number),
call a service technician and report
the error code .
BYPASS VALVE OPERATION
To shut off water to the system, position arrow handles as shown in
the bypass operation diagram below . If your valve doesn’t look like
the diagram below, contact your service technician for instructions
on how to shut off water .
NORMAL OPERATION
BYPASS OPERATION
ADJUST DAYS BETWEEN
REGENERATION OR TIME
OF REGENERATION
QUICK REFERENCE GUIDE:
GENERAL OPERATION
When the system is operating,
one of three displays will be
shown: time of day, gallons of
treated water available,
or gallons per minute .
Pressing
next
will
toggle between the
three choices .
TO SET TIME OF DAY
In the event of a
prolonged power
outage, time of day
flashes, indicating
that this needs to
be reset . All other
information will be
stored in memory
no matter how long
the power outage .
Please complete the
steps
as shown
to the right . To
access this mode,
press
set
clock
.
1 . Accessed by
pressing
set
clock
2 . Adjust hours with
+ and — buttons,
AM/PM toggles
at 12 .
3 . Press
next
4 . Adjust minutes with
+ and — buttons .
5 . Press
next
to
complete and
return to normal
operation .
For initial setup or to make
adjustments, please complete the
steps as shown to the right .
1 . Access by pressing
next
and +
button simultaneously .
2 . Hardness display shows “-nA-”
when used as a filter .
3 . Press
next
4 . Adjust days between regenerations
using + and — buttons .
5 . Press
next
6 . Adjust time of regeneration hour
with + and — buttons, AM/PM
toggles at 12 .
7 . Press
next
8 . Adjust time of regeneration minutes
with + and — buttons .
9 . Adjust backlight display function
with + and — buttons .
10 . Press
next
to complete and return
to normal operation .
© 2014 Water-Right, Inc. All rights reserved.
LIT-IMF/IMPF Man ROPU 9/14 2M