Warranty information owners name address telephone e-mail purchase date product name watershot wds-5d mk ii underwater housing model name wds-5d mk ii serial number dealer name price paid for your records 828 h avenue coronado, ca usa 92118-2522 www.Watershot.Com watershot wds-5d mk ii underwater ho...
Page 2 thank you for choosing watershot as part of your underwater imaging equipment. This watershot underwater housing is for the canon eos 5d mk ii digital slr camera. Please be sure to read and understand this manual and your camera’s manual before using. Precautions watershot housings are design...
Watershot wds-5d mk ii housing page 14 warranty conditions watershot's limited warranty provides the original owner that this watershot product is free from defects in material and workmanship. This warranty is not transferable. Watershot agrees, at its option, to either repair or replace the produc...
Watershot wds-5d mk ii housing parts map 1. Shutter lever 2. Mode dial 3. Watershot port flange 4. Zoom / focus dial lock 5. Zoom / focus dial 6. Electrical bulkhead 7. Accessory shoe base 8. Handle / tray kit 9. Iso / flash exposure button 10. Hot shoe connector 11. Quick control dial 12. Camera tr...
Watershot wds-5d mk ii housing maintenance insurance 1. After use and prior to storing the housing, soak it in lukewarm water for about 12 hours without the camera installed. While soaking, periodically manipulate all of the dials and buttons several times, this will aid in dissolving any salt depos...
Watershot wds-5d mk ii housing page 6 lens compatibility chart lens compatible port zoom/focus gear canon ef 24-70mm f/2.8l usm standard flat port w/ wds-k029 port extension ring wds-k032 zoom gear canon ef 16-35mm f/2.8l macro usm dome port w/wds- 027 extension ring wds-k031 zoom gear canon ef 17-4...
Watershot wds-5d mk ii housing page 10 removing the camera/post dive maintenance 1. After diving, rinse & soak the housing in fresh water while working all of the camera housing buttons and dials. 2. Dry the housing thoroughly with a clean towel. Repeat steps 1 through 4 as outlined on page 7 in the...
Watershot wds-5d mk ii housing page 8 camera / housing preparation & installation 1. Remove eyecup from camera (image 3). 2. Mount the camera on the camera tray making sure the tray lock post (#13 on parts map) is nested into the bottom of the camera. Tighten the tri-pod screw with a coin until the ...
