Ins tallation ins tructions inteliswitch ® as-100 automatic control switch 120/277vac specifications voltages ...............................................120 or 277vac, 50/60hz load requirements @120vac, 50/60hz ...........0-1300w ballast & incandescent @277vac, 50/60hz .............................
Description the watt stopper inteliswitch ® as-100 is an automatic control switch that operates as both a manual and automatic control device. Manually, it allows users to control loads on and off. Automatically, the as-100 receives signals to turn loads on and off from watt stopper lighting control...
Installation 1. Connect wires as shown in the wiring section that follows. Strip gauge #12 to #16 awg cu wire only 2. Attach the switch to the wall by mounting it in the wall box with the two (2) mounting screws provided. 3. Install the cover plate. 4. Turn on power to the switch and, if necessary, ...
Wiring the ground terminal must be connected to ground for the as-100 to function. Never connect the as-100 to a power pack; always connect the as-100 to a lighting control panel. * never connect line voltage to the 3-way terminal. Doing so will damage the as-100 and void the warranty. Hot neutral l...
Setup the as-100 automatic control switch comes factory preset and ready to install in conjunction with a lighting control panel. The default operation is manual-on/ off along with automatic-off when signalled by the lighting control panel. If an audible beep warning or automatic-on features are des...
Call 800.879.8585 for technical support operation manual on and off control is always available by pressing the on/off button. Automatic-off and automatic delayed-off are always enabled regardless of other setup mode options. When set for automatic-on mode (see setup section), the as-100 turns on th...
Www.Wattstopper.Com troubleshooting 1. Verify that all connections are tightly secured. 2. Ensure that all wiring is properly done according to the schematic (see wiring section). 3. Check for the correct option setting if the audible beep or automatic-on operating mode does not work properly (see s...
Warranty information watt stopper/legrand warranties its products to be free of defects in materials and workmanship for a period of fi ve (5) years. There are no obligations or liabilities on the part of watt stopper/legrand for consequential damages arising out of, or in connection with, the use or...
