Wattstopper InteliSwitch AS-100 Installation Instruction - page 2
DESCRIPTION
The Watt Stopper InteliSwitch
®
AS-100 is an automatic control switch that
operates as both a manual and automatic control device.
Manually, it allows users to control loads ON and OFF. Automatically, the
AS-100 receives signals to turn loads ON and OFF from Watt Stopper lighting
control panels, or other lighting control systems.
Lighting control panels not only automatically turn lights ON and OFF, but
can also send a shut-OFF signal to warn users that the switch will shut OFF
lighting in fi ve minutes. The LED on the AS-100 will blink, and an audible beep
(if enabled, see SETUP section) warns users of the impending shut-OFF.
The display has three (3) LEDs that indicate
activity and Setup Mode options (or current
choices). The center (red) LED blinks
during the shut-OFF time delay, indicating
that lights will soon turn OFF.
A Setup Mode allows selection of options
for operation with a lighting control panel .
Call 800.879.8585 for Technical Support
LED Display behind
translucent window
(3 LEDs: Green – Red – Green)
ON/OFF button