- DL manuals
- Wavion
- Accessories
- WBS-2400 SCT 120
- Installation Manual
Wavion WBS-2400 SCT 120 Installation Manual
Summary of WBS-2400 SCT 120
Page 1
Wbs-2400 & wbs-5800 outdoor wi-fi sector base station installation guide rev. 3 february 2009.
Page 2
Note: to better reflect the value of wavion products we are changing the name of our product family from access points (ap) to wireless base stations (wbs), consequently the existing ws- 410 product name will be changed to wavion wbs-2400. The new product name emphasizes the difference in architectu...
Page 3
Installation guide 3 warning : changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note : this device complies with part 15 of the fcc rules. Operation is subject to the following two condition...
Page 4
4 wavion networks contents c h a p t e r 1 about this guide ........................................................................ 5 preface .................................................................................................... 5 conventions .............................................
Page 5: Preface
5 wavion networks chapter 1 about this guide preface this guide details the wavion wbs-2400/5800 sector installation procedures. The intended audience of this document is trained technical professionals. Conventions the exclamation point within a triangle is intended to alert the user to the presenc...
Page 6
About this guide 6 wavion networks contacting technical support for technical support, contact wavion using these methods: address: wavion technical support wavion 6 hayetzira street, po box 580 yoqneam illit, 20692 israel telephone: +972-4-9097300 fax: +972-4-9097322 email: support@wavionnetworks.C...
Page 7
Introduction installation guide 7 chapter 2 introduction wbs-2400/5800 sector a high capacity, ip services oriented broadband wireless access system. Wbs-2400/5800 sector is a new category of broadband wireless base station designed from the ground up for metro-wi-fi deployments. The system employs ...
Page 8
8 wavion networks chapter 3 package content check that the package contains: • poe injector unit with wall mounting kit • outdoor unit • pole mounting bracket for the outdoor unit • allen head wrench with 4 screws • waterproof sealing tape for ip67 (band to sealing rubber) additional equipment and t...
Page 9
Package content installation guide 9 • addition tools and materials, including appropriate means (e.G. A pole) for installing the outdoor equipment. • 1/4-inch flat blade screwdriver warning : only experienced installation professionals who are familiar with local building and safety codes and, wher...
Page 10
10 wavion networks chapter 4 installing the wavion wbs-2400/5800 sector base station this guide explains how to safely install the wavion wbs-2400/5800 sector base station. The following topics are covered in this chapter: • important safety instructions • preparing for installation • mounting strat...
Page 11
Installation guide 11 important safety instructions w arning : it is illegal to modify the construction of this product. Modifying the operating frequency or enhancing the transmit output power through the use of external amplifiers or other equipment is specifically disallowed by the "telecommunica...
Page 12: Preparing For Installation
12 wavion networks caution : there are no user-serviceable parts inside. All service must be performed by qualified personnel. Caution only ul listed parts and components will be used for installation. Use ul listed devices having an environmental rating equal to or better than the enclosure rating ...
Page 13
Installation guide 13 choosing a location to ensure the optimal performance select the locations for the equipment using the following guidelines: the antenna (integrated on the front panel of the outdoor unit) should provide a direct, or near line of sight, with the sector location that need to be ...
Page 14: Mounting Strategies
14 wavion networks mounting strategies consider the available mounting structures and antenna clearance when choosing a mounting location. Wavion outdoor unit wbs-2400/5800 sector should be mounted on horizontal pole only the antennas pointing vertically and clear of obstruction. It is recommended t...
Page 15
Installation guide 15 figure 4.2 using special hose clamps & screwing the clamps mounting on a pole/streetlight wbs-2400/5800 sector can be mounted on a pole, tower, or streetlight. It is recommended to mount the wbs-2400/5800 sector on aluminum or galvanized steel structures. Note before mounting t...
Page 16
16 wavion networks to mount the wavion wbs-2400/5800 on a metal/wood/streetlight pole: 1. Choose a mounting location. You can attach the wbs-2400/5800 sector outdoor unit to any pole or pipe with diameter of 3-10 inches. Wooden poles of larger diameter require different types of clamps (any streetli...
Page 17
Installation guide 17 note : the wbs-2400/5800 unit must be parallel to the ground. The unit can be rotated to obtain the correct position. Note installations on large wooden poles require band clamps such as those supplied by panduit, www.Panduit.Com. Such a product is listed as "metal, locking tie...
Page 18
18 wavion networks to ground the wavion wbs-2400/5800: the grounding screw is located on the side panel of the outdoor unit. To connect the grounding cable: 1. Connect one end of a grounding cable to the grounding terminal and tighten the grounding screw firmly. Do the following steps: a. Remove the...
Page 19
Installation guide 19 figure 4.6 grounding indoor injector by network protection unit figure 4.7 grounding injector that located outdoor by network protection unit.
Page 20: Connecting Power And Data
20 wavion networks connecting power and data the following describes how to apply power and data to the wbs-2400/5800x caution : you must always install an external grounding wire. Perform a simple continuity check between the wbs-2400/5800and the ground termination point to confirm. You must also g...
Page 21
Installation guide 21 when connecting to the ethernet port, if you need to terminate the ethernet cable, use a standard rj45 termination. Use a shielded rj45 plug and be sure to connect the shield of the ethernet cable to the shield of the rj 45 plug. To connect to the data port: 1. Make sure that t...
Page 22
22 wavion networks figure 4.9 sealing rubber 7. Remove the strip nylon cover.
Page 23
Installation guide 23 figure 4.10 sealing rubber 8. Tighten the band on sealing rubber for better sealing or using weatherproof stripe. Figure 4.11 w eatherproof stripe sealing 9. Connect the data cable from the network to "ethernet" port of poe injector. 10. Connect poe injector to ac power source ...
Page 24
24 wavion networks poe port rj45 pin descriptions pin t/r signal color description 1 t txd+ orange-white tx data 10/100baset 2 r txd- orange tx data 10/100baset 3 t rxd+ green-white rx data 10/100baset 4 r poe+ blue power input, 55 vdc (+) 5 t poe+ blue-white power input, 55 vdc (+) 6 r rxd- green r...
Page 25: Service Instructions
Installation guide 25 service instructions the wavion wbs-2400/5800 contains no user serviceable parts inside..
Page 26
26 wavion networks chapter 5 product specification wbs-2400 sector the tables in this chapter contain specifications for the wavion wbs-2400. Wireless specifications compliant ieee 802.11b/g frequency band 2.4 - 2.483 ghz modulation • 802.11b: dsss (dbpsk, dqpsk, cck) • 802.11g: ofdm (64qam, 16qam, ...
Page 27
Installation guide 27 dbm @ mbps -92 dbm @ 36 mbps -88 dbm @ 48 mbps -86 dbm @ 54 mbps security specifications packet filtering via layer 2 & 3 wep (64 bit or 128 bit) wpa: encryption: wep or tkip authentication: pre-shared key or 802.1x with radius server (eap-tls, peap, eap-ttls) vpn pass-through ...
Page 28
28 wavion networks physical specifications network interfaces • auto-sensing 10/100 ethernet • input from wavion injector power input • power from a wavion poe injector. Indicator lights • ethernet port led link/act indicator • system status led indicator • rf channel status indicator physical dimen...
Page 29
Installation guide 29 environmental specifications operating temperature range -40°c to +55°c (without sun shield) -40°c to +60°c (with sun shield) storage temperature range -45°c to +85°c weather rating ip67 wind survivability 165 mph salt and fog rust resistance mil-std-810f 509.4 shock and vibrat...
Page 30
30 wavion networks chapter 6 antenna 2.4ghz specifications and patterns the chapter describes antenna specifications and patterns for the antennas supplied with the wavion wbs-2400. Mt-343037/cv 2.4ghz sector antenna 2.4ghz flat panel base station antenna.
Page 31
Installation guide 31 antenna electrical specifications number of antennas 3 frequency range 2.4 - 2.4835 ghz peak gain 2.4-2.4835 ghz 10.5 dbi (min) 0 dbi (max) design goal at all directions -8 dbi (max) design goal at all directions vswr 1.5 :1 (max) r.L. -14 db (max) azimuth 3 db beamwidth 120° ±...
Page 32
32 wavion networks antenna environmental test standard duration temperature notes water tightness iec 529 - - ip67*** internal pressure tbd **** solar radiation astm g53 1000 h - - flammability ul 94 - - class hb salt spray iec 68-2-11 ka 500 h - - ice and snow - - - 25mm radial wind speed survival ...
Page 33
Installation guide 33 chapter 7 product specification wbs-5800 the tables in this chapter contain specifications for the wavion wbs-5800. Wireless specifications compliant ieee 802.11b/g frequency band 5.725–5.850 ghz modulation 802.11a: ofdm (64qam, 16qam, qpsk, bpsk) tx power maximum max. Power pe...
Page 34
34 wavion networks management specifications web based configuration and management too snmpv2 with standard and wavion mib support configuration save and restore network and client statistics security specifications packet filtering via layer 2 & 3 wep (64 bit or 128 bit) wpa: encryption: wep or tk...
Page 35
Installation guide 35 environmental specifications operating temperature range -40°c to +55°c (without sun shield) -40°c to +60°c (with sun shield) storage temperature range -45°c to +85°c weather rating ip67 wind survivability 165 mph salt and fog rust resistance mil-std-810f 509.4 shock and vibrat...
Page 36
36 wavion networks approvals rf fcc cfr 47 part 15, sub part c safety tuvus en 60950-1:2001+a11:2004 iec 60950-1:2001 first edition information technology equipment – safety – part 1 emc fcc cfr 47 part 15, sub part b, class b (usa).
Page 37
Installation guide 37 antenna electrical specifications number of antennas 3 frequency range 5.7 - 5.9 ghz peak gain 5.7 - 5.9 ghz 12.5 dbi vswr 1.5 :1 (max) r.L. -14 db (max) azimuth 3 db beamwidth 120° ± 3° azimuth ripple 3 db (max) azimuth squint ± 3° polarization linear vertical elevation 3 db b...
Page 38
38 wavion networks internal pressure tbd **** solar radiation astm g53 1000 h - - flammability ul 94 - - class hb salt spray iec 68-2-11 ka 500 h - - ice and snow - - - 25mm radial wind speed survival operation - - - - - - 266 km/h 160 km/h regulatory compliance rohs , ce 0682 low temperature iec 68...
Page 39
Installation guide 39 chapter 8 antenna 5.8ghz specifications and patterns the chapter describes antenna specifications and patterns for the antennas supplied with the wavion wbs-5800. Mt-463009cv 5.8ghz antenna azimuth patterns directional antenna.
Page 40
40 wavion networks mt-463009cv 5.8ghz antenna elevation patterns.
Page 41
Installation guide 41 chapter 9 installation accessories this chapter describes the accessories available for the wbs-2400 and ordering information. The following topics are covered in this chapter: • ethernet cables • sun protection • lightning protection • power over ethernet.
Page 42
42 wavion networks ethernet cables description manufacturer part number distributor contact information outdoor cat5e double jacket 4-pair data cable teldor 8393204101 g.Bares tel: +972-(4)- 8215450 sun protection description product name part number sun shield for wbs-2400/5800x, extends upper oper...
Page 43
Installation guide 43 chapter 10 wind loading considerations this chapter describes wind loading considerations for the wbs-2400/5800x. Note: it is recommended to evaluate the static and dynamic load bearing capabilities for each assembly and installation individually. It is your responsibility to e...
Page 44
44 wavion networks chapter 11 acronyms acronym description 2p two-phase or split phase 2w two-wire 3w three-wire ac alternating current ansi american national standards institute awg american wire gauge c celsius cat category cck complementary code keying cfr code of federal regulations csa canadian...
Page 45
Installation guide 45 mbps megabits per second mhz megahertz mil-std military standard n neutral nec national electrical codes nema national electrical manufacturers association ofdm orthogonal frequency division multiplexing p phase pe protective earth poe power over ethernet rj45 registered jack 4...
Page 46
46 wavion networks chapter 12 appendix a: wbs-2400/5800 product list part number product namer product description tbd 12406101 wbs-2400-fcc spatially adaptive, multi radio 2.4ghz wifi base station, 6 antenna fcc/tuv compliant 12406102 wbs-2400-eu spatially adaptive, multi radio 2.4ghz wifi base sta...