Wavion WBSn-2400 Quick Start Manual - page 16
WBSn-2400 Quick Start Guide
Page 16
ACS (online, Offline)
The Automatic Channel Selection (ACS) utilizes an embedded algorithm to scan for the best channel with
which your base station can work, ensuring optimal capacity, minimal interference and maximum
performance.
Offline ACS performs a full scan of the available channels while the system is down, determining which
channels are the best and most interference-free, and prompting you to choose these channels prior to
resuming and reactivating the system .
Online ACS will run in the background while the system is up, checking the available channels, and whether
any of those available are better for use than the channels currently being utilized.
Note: The ACS will be enabled in a future release.
Accessing Automatic Channel Selection
1. Select Configuration => Wireless => Radio.
2. Expand the required field (Online ACS or Offline ACS) to specify the parameters, described in the
following table.
Parameter
Description
Offline ACS
Select Channel button
Click to select a specific channel
Scan
Click to scan, then define the following parameter values:
• Optimization mode:
o
Throughput
o
Range
• Auto Switch
• On
• Off
• Estimate Scan Time (specify)
Stop Scan button
Stops scan
Optimization Value
Specify the manner in which the channel will be optimized:
• Data
• Video Surveillance
• VOIP
• Custom
Number of loops
Specify how many times to loop the scan
Online ACS
Parameters to be specified in a future version