Webasto Diesel Cooker x100 Operating And Maintenance Manual - Webasto Diesel Cooker X100
2 / ENGLISH
Webasto Diesel Cooker X100
Figure 2:
Combustion
indicator lamp
(red)
High altitude switch
High altitude
indication lamp
(orange)
Power adjustment
Power switch
Power indication lamp (yellow)
2 Use of the cooker
2.1 Start
The cooker starts to heat up
automatically when the
power button is switched to
ON position. The yellow
indicator lamp lights up as
soon as the cooker is
switched on. The red
combustion lamp will light up
when the combustion is
stabilized in the burner,
about 2.5-4 minutes after the
start-up.
Please note:
The cooker will not
necessarily start at first after
the installation when the fuel
hose is empty. Then the
combustion light starts to
blink about 4.5 minutes after
the start-up. Turn the power
switch to OFF position. The
cooker cannot be restarted
until both indicator lamps
have gone out (run down
phase).
Once the indicator lamps
have gone out, restart the
cooker. The combustion
lamp will light up about 2.5-4
minutes after the start-up,
when the combustion is
normal.
Never keep the cooker on without
cooking.
The cooker locks itself after two
unsuccessful starts.
If the device will not start, even though
the fuel has reached the pump, do not
try to start it more than twice without
checking the cause of the problem.
Yellow
Red
0
0
1
1
0,25 s
0,25 s
0,25 s
0,25 s
Power
indication
lamp
Combustion
indication
lamp
Run down phase about 5 min
Figure 3: Signal lights of operating panel during normal operation
Start
Stop
⇓
⇓
Start-up 2.5-4 min
Cooking
For safety reasons do not use the
cooker when the vehicle is moving.
Make sure that the vehicle is ventilated
while cooking.