Webasto Telestart T80 Operating Instructions Manual - Note:
Other manuals for Telestart T80:
Operating, And Servicing Instructions, Installation Instructions Manual
of
13
13
D
GB
Programming Telestart Transmitter
1. Place batteries into the battery compartment of the transmitter.
2. Remove fuse 1A (black) from the heater's fuse holder (voltage interruption).
3. Wait at least 5 seconds.
4. Replace fuse in heater's fuse holder and within 5 seconds press the OFF
button on the transmitter for at least 1 second.
5. "Learning" is completed.
A second or third hand-held transmitter can be programmed in the same manner.
NOTE:
The learning process can be repeated as often as necessary. The "oldest" transmitter
will be deleted each time.
1A
1A
min. 5 Sec.
max. 5 Sec. min. 1 Sec.
OFF
T80_a_BA.book Seite 13 Donnerstag, 22. April 2004 4:01 16