Webasto Telestart T80 Operating Instructions Manual - Off
15
D
GB
Response at the transmitter when the heater is switched on and
off
To switch on the heater or ventilation system
Hold the transmitter with the aerial upright and press the
ON button until the LED lights up (approx. 1 second).
The Telestart in the vehicle will send a response.
The LED on the hand-held transmitter indicates whether
the signal has been received. After the signal the heater
or ventilation system is indicated by brief flashing signals
(every 2 seconds).
The operation indicator extinguishes:
– after the preset operating time has elapsed.
– when Telestart is switched off.
The LED on the transmitter
will be lit for 2 seconds:
red = Heating mode
green = Ventilation mode
The signal has been received and the heater /
vehicle fan switched on or off.
The LED on the transmitter
flashes for 2 seconds.
Error during signal transmission. Change your
location and repeat transmission.
T80_a_BA.book Seite 15 Donnerstag, 22. April 2004 4:01 16