Webasto Telestart T91 Operating And Maintenance Instructions Manual - page 7
07
DD
GB
Feedback from transmitter upon turning On/Off
Switching on heater*
Hold the transmitter with the aerial upright and press
the
ON
button until the LED lights up (approx. 1
second).
The Telestart receiver in the vehicle transmits a confirmation
of the reception (see overview above: "Feedback").
Then the forwarding of the signal to the heater is
confirmed with brief flashing signals (every 2 seconds).
The operation indicator extinguishes:
–
After the preset operating time has elapsed
–
After switching off with Telestart.
*
not supported
The LED on the transmitter il-
luminates for 2 seconds:
red
= Heating mode
green
= Ventilation mode*
The signal has been received and the heater /
vehicle fan switched on or off.
The LED on the transmitter
flashes for 2 seconds.
Error during signal transmission.
Change your location and repeat transmission.
1314649A_BA_T91.book Page 24 Wednesday, December 2, 2009 3:11 PM