Webasto Telestart T91 Operating Instructions Manual - Red
25
GB
Feedback from Transmitter Upon Turning On/Off
Switching On Heater or Ventilation*
Hold the transmitter with the aerial upright and press the
ON button until the LED lights up (approx. 1 second).
The Telestart receiver in the vehicle transmits a confirmation
of the reception (see overview above: "Feedback").
Then the forwarding of the signal to the heater is confirmed
with brief flashing signals (every 2 seconds).
The operation indicator extinguishes:
– After the preset operating time has elapsed
– After switching off with Telestart.
* Please observe the information under "Use".
The LED on the transmitter
lights up for 2 seconds:
red
= Heating mode
green
= Ventilation mode*
The signal has been received and the heater /
vehicle fan switched on or off.
The LED on the transmitter
flashes for 2 seconds.
Error during signal transmission.
Change your location and repeat transmission.
1314649B_BA_T91.book Page 25 Tuesday, January 31, 2012 9:42 AM