Webasto Thermo Call TC2 COMFORT Installation Manual - page 10
of
13
Thermo Call TC2
14
- Connect the enclosed short purple
wire (3), using the connector (4), to
the purple wire (5) of the additional
heating cable harness.
- Plug micro-timer (2) into free location
of the 4-pole connector (1) (digital
timer)
Final Connection and Test
- Connect the 12-pin plug (1) of the
main cable harness (2) to the main
module of the Thermo Call TC2
- After approx. 20 seconds, the control
lamp (3) on the main module lights up
green, then begins to blink evenly.
- Call Thermo Call TC2 and test its
function in accordance with the
operating manual.
1
3
4
5
1
3
2