Weber 3200 LP Manual - Install Work Surface

10

Check that the side burner is properly assembled.

Figure 16

Burner cap

Burner ring

Burner head

Burner base

Windshield

Grate

(a)

(c)

(b)

Burner orifice

WARNING: Set the burner ring onto the burner head.

Rotate the burner ring until the four lugs on the

burner ring are seated in the four slots on the burner

head. Figure 16 (b).

Note:  The burner head has a hole in it that fits over the

igniter electrode.

INSTALL WORK SURFACE

AND SIDE BURNER

FOR THE PLATINUM SERIES II 3200

(CONTINUED)

Slots

Lugs

Igniter

electrode

After this assembly, proceed to step “Install Bottom

Rack” on page 13.