Weber 3200 LP Manual - Install Work

8

INSTALL WORK

SURFACES

FOR THE PLATINUM SERIES II 2200

You will need...left work surface, right work surface, four

1/4-20 x 1/2 inch bolts, four nylon washers and a 7/16

inch or adjustable wrench.

Insert the left work surface tabs in the slots to the left of

the cooking box. Figure 11 (a). Slip washers on the bolts

and insert the bolts as shown. Tighten. Figure 11 (b).

Insert the right work surface tabs in the slots to the right of

the cooking box. Figure 11 (c). Slip washers on the bolts

and insert the bolts as shown. Tighten. Figure 11 (d).

Platinum Series II 2200

Figure 11

(a)

(b)

(c)

(d)

View from

left side

View from left

underside

View from

right side

View from right

underside

Tabs

Tabs

Tabs

If you have the Platinum Series II 2200,

continue to step “Install Work

Surfaces” on this page.

If you have the Platinum Series II 3200,

go to step “Install Work Surface and

Side Burner” on page 9.

If you have the Platinum Series II 3400,

go to step “Install Work Surface and

Side Burner” on page 11.

After this assembly, proceed to step “Install Bottom

Rack” on page 13.