Weber 6741 Instruction Manual - page 11
11
Count down
1. When the unit is not in counting and not in setting mode, Press [UP] and [DOWN] to
set the timer Minute value, hour value will increase or decrease automatically.
2. Press Timer to start Count down, the icon “ ” will solid display.
3. Press Timer to stop Count down, press Timer again, it will continue to count down
again.
4. Press and hold Timer for 2 seconds to clear the setting back to 0:00 when timer
stop.
5. During counting up or down, if the timer’s value less than 1 hour, the display format
will automatically switch to the “MIN:SEC” format. On the contrary, if the timer’s
value reached 1 hour or higher, the display format will is “Hour: Min” format, but the
count up step still is one second.
6. When count down reaches “0:00”, the unit will has 3 beeps in one second and flash
Timer value, at the same time, the unit will stop count, press any key to stop alarm.
Note: The minimum setting for the timer is 1 minute and the maximum setting is
23 hours and 59 minutes.
Count up
1. When the timer is 0:00, press the START/STOP button to start count up. The icon
“ ” will solid display
2. Press START/STOP button to stop the count up. press Timer again, it will continue to
count up again.
3.
Press and hold the START/STOP button 2 seconds to clear the setting back to 0:00.
4. When Timer count-up reach to 24:00, the unit will has 3 beeps in one second and
flash Timer value, at the same time, the unit will stop count up.
Count down timer Count up timer Scroll throuht the Timer
with Up and Down
Arrows