Worldlawn WY 36 Operator's Manual

Other manuals for WY 36: Operator's Manual

Summary of WY 36

  • Page 1

    R wy36 commercial mower operator’s manual worldlawn power equipment, inc. Industrial park 2415 ashland ave. Beatrice, ne 68310 toll free number: 1-800-267-4255.

  • Page 3

    Operator’s manual this manual contains assembly, operating, maintenance, adjustment, and safety instructions for your wy36 lawnmower. Before operating your mower, read this manual in its entirety carefully. By following the operating, maintenance, adjustment, and safety instructions, you will prolon...

  • Page 4

    Table of contents 1. Safety …………………………………………………………………………………... 1 1.1 safety alert symbol ……………………………………………………………………….. 1 1.2 training ………………………………………………………………………………….. 1 1.3 preparation ……………………………………………………………………………….. 1 1.4 operation ……………………………………………………………………………….... 2 1.5 maintenance & storage ……...

  • Page 5

    5.1.2 clean engine air cooling system …………………………………………………………. 12 5.1.3 clean grass build-up from under deck …………………………………………………… 12 5.1.4 check mower blades …………………………………………………………………….. 12 5.1.5 check safety interlock system …………………………………………………………… 12 5.1.6 check for loose hardware ……………………………………………...

  • Page 6

    1 1. Safety 1.1 safety alert symbol this safety alert symbol is used both in this manual and on the machine to identify important safety messages which must be followed to avoid accidents. This symbol means: attention! Become alert! Your safety is involved! The safety alert symbol above alerts you t...

  • Page 7

    2 potential hazard · in certain conditions gasoline is extremely flammable and highly explosive. What can happen · a fire or explosion from gasoline can burn you, others, and cause property damage. How to avoid the hazard · do not smoke while refueling, and stay away from an open flame or where gaso...

  • Page 8

    3 dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and the storage of the equipment. It is essential that all operator safety mechanisms be connected and in operating condition prior to use for mowing. Potental h...

  • Page 9

    4 1.4.5 use caution when backing up. Look behind you!! 1.4.6 stop the blades when transporting the mower to and from the area to be mowed. 1.4.7 never operate the mower with defective guards, shields, or covers. Always have safety shields, guards, switches, and other devices in place and in proper w...

  • Page 10

    5 1.6.2 safety decals must be replaced if they are missing or illegible. 1.6.3 when new components are installed, be sure that current safety decals are affixed to the replaced components. 1.6.4 new safety decals may be obtained from your authorized equipment dealer or distributor or from worldlawn ...

  • Page 11

    6 8. On the mower deck 9. Top front of console 10. On the console (electric) 11. Rear of lh console frame 12. Rear of rh console frame 13. On the mower deck 14. Rear of console 15. On the belt cover 16. On the console 17. On the front of the mower deck 18. On the console (recoil).

  • Page 12

    7 19. On the left side of front frame support 20. On the right side of front frame support 21. On the rear frame 2. Specifications 2.1 model number: wy3615khe wy3615kw wy3615kwe wy3613kw wy3613kwe wy3617kwe wy3613hd wy3613hde wy3616kw wy3616kwe 2.2 engine: model engine starter wy3615khe cv15 electri...

  • Page 13

    8 2.6 operator controls (see fig 1)  key switch: located on the control panel. Recoil starter has two positions. Turning to "on" starts the engine; turning to "off" stops the engine. Electronic ignition model has three positions. When starting, turn to "start" position; then remove your hand.  thr...

  • Page 14

    9 fig 4 fig 5 2.8 approximate dimensions: 2.8.1 width: discharge chute down 46.6in (118cm) discharge chute up 39.3in (100cm) 2.8.2 overall length: 71.6in(182.0cm) 2.8.3 overall height: 41.7in (108cm) 2.8.4 curb weight: 450lbs(205kg) 2.9 torque requirements  cutter housing spindle nut: 140-145ft-lb ...

  • Page 15

    10 3.3 service engine engine is shipped without oil. Fill to the appropriate level with sae10w-30 or 10w-40. 3.4 grass catcher assembly  when the mower is assembled with a kohler engine, compress the foot pedal down, the mulching plate will close. Remove the 4 m8×25 bolts attached to the discharge ...

  • Page 16

    11 potential hazard · the rotating blades under the mower deck are dangerous. What can happen · blade contact can cause serious injury or kill you. How to avoid the hazard · do not put hands or feet under the mower or mower deck when the blades are engaged. Potential hazard · an uncovered discharge ...

  • Page 17

    12 into place. Remove the dipstick and read the oil level.  if the oil level is low, add oil to bring the oil level up to the "full" mark on the dipstick. Use oil as specified in the engine owner’s manual. Do not overfill. Important: do not operate the engine with the oil level below the "low" or "...

  • Page 18

    13 essential that operator safety mechanisms be connected and in proper operating condition prior to use for mowing. 5.1.6 check for loose hardware. Service interval: daily  stop engine, wait for all moving parts to stop, and remove key.  visually inspect machine for any loose hardware or any othe...

  • Page 19

    14 fig 10 5.2 adjustments important: disengage the blade drive lever, shut off engine, wait for all moving parts to stop, and remove key before servicing, cleaning, or making adjustments to the unit. 5.2.1 cutting height adjustment.  stop machine and move drive levers out to neutral lock position. ...

  • Page 20

    15 warning: be sure engine is off before removing belt cover. 5.2.3 transmission drive belt transmission drive belt is on the underside of the engine frame weldment; adjust the belt movement 1/4″ with 10 pounds of pressure. Adjust the tension by moving transmission drive idler pulley. See fig12 warn...

  • Page 21

    16 note: after carefully checking the above steps, attempt to start the engine. If it does not start, contact your authorized machine service dealer. Important: it is essential that all operator safety mechanisms be connected and in proper operating condition prior to mower use. When a problem occur...

  • Page 22

    17 chart 7.1.1 voltage reading percent charge maximum charger settings charging interval 12.6 or greater 100% 16volts/7 amps no charging required 12.4-12.6 75%-100% 16volts/7 amps 30 minutes 12.2-12.4 50%-75% 16volts/7 amps 1 hour 12.0-12.2 25%-50% 14.4volts/4 amps 2 hours 11.7-12.0 0-25% 14.4volts/...

  • Page 23

    18 8. Electrical diagram recoil start electric start.

  • Page 24

    19 limited warranty worldlawn power equipment, inc 36" mower worldlawn power equipment, inc, (“worldlawn”) warrants that the worldlawn 36" mower (“mower”) will be free from defects in material and workmanship for a period of one year commercial from the original date of purchase. During the warranty...

  • Page 25: Notes:

    Notes:.

  • Page 26: Notes:

    Notes:.

  • Page 28

    Worldlawn power equipment, inc . Industrial park 2415 ashland ave. Beatrice, ne 68310 phone: (402) 228-4255 fax: (402) 223-4103 www.Worldlawnpowerequip.Com form no. 36102-201111 r.