Worldlawn WY 36 Operator's Manual - page 12
7
19. On the Left Side of Front Frame Support
20. On the Right Side of Front Frame Support
21. On the Rear Frame
2. SPECIFICATIONS
2.1 Model Number:
WY3615KHE
WY3615KW
WY3615KWE
WY3613KW
WY3613KWE
WY3617KWE
WY3613HD
WY3613HDE
WY3616KW
WY3616KWE
2.2 Engine:
MODEL
ENGINE
STARTER
WY3615KHE
CV15 Electric
Kohler
WY3613KW
FH381V Recoil
Kawasaki
WY3613KWE FH381V Electric
Kawasaki
WY3615KW
FH430V Recoil
Kawasaki
WY3615KWE FH430V Electric
Kawasaki
WY3617KWE FH541V Electric
Kawasaki
WY3613HD
GXV390 Recoil
Honda
WY3613HDE
GXV390 Electric
Honda
WY3616KW
FS481 Recoil
Kawasaki
WY3616KWE FS481 Electric
Kawasaki
2.3 Frame Assembly
Front Frame: Rectangle tube 1.5"×1.18"×.16"
Thickness (Steel plate of engine frame): .16".
Fuel Tank: 5 gallon seamless polyethylene,
removable
Drive Wheel: 13.0×6.50-6 two-ply pneumatic
tubeless.
Caster Wheel: 9×3.5, smooth, needle bearing
pneumatic tubeless.
2.4 Drive System
Type: Belt drive with twin power belts for
increased friction to pulley surface.
Transmissions: Peerless 5-speed transmission,
Model #700-079
Steering/Travel Control: Clutch/brake fingertip
steering, key lock switch.
Brakes: 6″ brake drum, band brake, one on each
wheel.
Safety Group: Hand actuated operator presence
system with blade clutch and transmission
interlock to engine kills.
Forward Speed Range: 0 to 4.7mph(0-7.6km/h)
Reverse Speed Range: 0 to 2.0mph(0-3.2km/h)
2.5 Cutting Deck
Type: Floating deck, out-front design with
anti-scalp rollers
True Cutting Width: 36"(904.4cm)
Blade engagement: Mechanical
Cutting Height Adjustment: Manual adjustment
1.5″ (3.8cm) to 4.5″ (11.43cm) in 0.5″ (1.27cm)
increments. When adjusting the cutting height,
hang the deck by the two hooks on the front
frame; then insert the pin into the proper hole.
Hang the deck on the hooks of the front frame
only when adjusting the cutting height. Don’t
hang it on the frame during transportation and
mowing or it could result in damage to the
machine.
Cutting
Blades:
0.2"(5mm)
thick,
two
18″(45.7cm) blades.
Cutting Deck Belts: B-section.