X-Digital System XDS PRO04P Quick Start Manual - page 3
1327 R830002-1062
XDS PRO4P Quick Start Guide
5/6/2010
Rev A
Page 3 of 11
3.3 Connecting the Audio Ports
The analog audio outputs of the PRO4P receiver is routed through the DB-9 connector
labeled Audio-A through Audio-D on the rear panel. The table below details the wiring
pin out for the ports:
Pin
Signal
1
L OUT+
2
Ground
3
L OUT+ (*)
4
Ground
5
R OUT+
6
L OUT-
7
Ground (*)
8
L OUT- (*)
9
R OUT-
(*) - These additional output pins are provided for StarGuide receiver
compatibility.
Your receiver will be delivered with a parts kit that will include four mating DB-9
connectors with shells. Please see the XDSPRO4P User’s Guide for detailed
specifications on the audio output.
3.4 Relay Closures
The receiver has two DB-37 connectors labeled Relay-A and Relay-B on the rear panel.
These connectors contain sixteen relay/contact closures that can drive external
automation systems. The tables below detail the pin out for the ports: