X-GLOO 4x4 User Manual - Elements

Skywalk GmbH & Co. KG - Windeckstraße 4 - 83250 MARQUARTSTEIN | GERMANY

16

ELEMENTS

TUNNEL PART

The Tunnel Part makes it possible to connect one or more  

X-Gloos. It can be used to connect one size tent to a different size 

tent, or to connect multiple tents of the same size. The Tunnel Part 

is zipped on between the X-Gloos instead of using a Side Wall 

(1)

. 

CANOPY AND CANOPY BANNER

The covered area of the X-Gloo can be expanded with the help of 

the Canopy 

(2)

. To attach, first connect the Canopy to the Matrix 

using the zippers. Next, inflate the Front Tube and Strut Tube. 

Thanks to the One-Pump System, both Tubes can be inflated  

simultaneously.

PLEASE NOTE: 

The Overpressure Valve opens automatically as 

soon as maximal pressure is achieved.

Lastly, zip the optional Canopy Banner (if using) into the zipper at 

the upper part of the Front Tube (5x5 and 6x6 models only).

Using the One-Pump System to seperate the Front Tube 

and Strut Tube

The Front- and Strut Tube of the Canopy are connected with a small 

tube/One-Pump System. This allows both Tubes to be inflated 

simultaneously.

In the event of pressure loss, it is possible to isolate the cause of 

the leak by using the tube clamp to pinch the small connecting 

tube on the One-Pump System closed 

(3)

. With the Tubes sepeara-

ted from each other in this manner, it is possible to observe which 

is leaking air. 

When it is not needed for this purpose, the tube clamp should 

remain open and tucked away in the included neoprene sleeve.

 !

1

2

3