X-GLOO 4x4 User Manual - page 18

Skywalk GmbH & Co. KG - Windeckstraße 4 - 83250 MARQUARTSTEIN | GERMANY

BLOCK-BUILDING SYSTEM / X-GLOO MATRIX

The X-Gloo Matrix can be easily disassembled into individual parts 

(Roof and Tubes). Thanks to this feature, the individual parts can 

be removed for repaired or replacement. Re-attaching the new or 

repaired part is just as easy.

DISASSEMBLY

Step 1:   

Beneath the Roof at each Tube end, you will find two 

velcro straps fixing the tent Roof to the Tube. Open both 

straps and disconnect them from the plastic buckles 

(1)

.

Step 2:

Remove the plastic toggle button from the loop which 

is located at the end of the zipper connecting the Roof 

to the Tube end 

(2)

, and then unzip the Roof from the 

Tube 

(3)

. Repeat Steps 1 and 2 on the remaining three 

Tubes. The Roof can now be removed 

(4)

.

Step 3:

To seperate the Tubes from one another, use an 8mm 

Allen key to unscrew the bolt in the aluminum Tube Con-

nector and then remove the bolt and cap 

(5)

. The Tubes 

can then then be easily removed by sliding them out of 

the channels in the Tube Connector 

(6)

.

18

1

2

3

4

5

6

For more information, watch our how-to video at:  

www.x-gloo.com/en/experience/videos/