X-GLOO 4x4 User Manual - Takedown / Cleaning

Skywalk GmbH & Co. KG - Windeckstraße 4 - 83250 MARQUARTSTEIN | GERMANY

20

TAKEDOWN / CLEANING

TAKEDOWN

Make sure that all of the Tent Pegs are removed and all Anchoring 

Lines are released before deflating the Tubes on your X-Gloo. 

Step 1:  

Remove all elements (e.g. Side Walls, Canopy, etc) which 

are attached to the X-Gloo. 

Step 2:  

Next, open the Overpressure Valve on each Tube 

(1)

. The 

air will completely escape within minutes. 

Step 3:  

Then turn the X-Gloo inside-out, so that the tube 

intersection loop is facing outwards 

(2)

.

Step 4:  

Lay the Tubes on top of one another, with the Valves facing 

upwards. The Roof should be drawn outwards in large folds 

(3)

. 

Step 5:  

After the last of the air has escaped, roll up the X-Gloo 

from the Roof to the Tube endings 

(4)

.

Step 6:  

Now the X-Gloo can be packed in the X-GLOO Multifunction 

Transport Bag or Trolley. Side Walls can be stored separately 

in the protective Side Wall Bag included in delivery.

 !

CLEANING

Dirt and stains should be removed 

without 

the use of soap or 

water whenever possible. We recommend using a soft, dry brush or 

microfiber cloth. If the stain cannot be brushed away, then use a 

small amount of conventional soap mixed with lots of water.

Important information for digitally-printed parts!

Digitally-printed elements should NEVER be cleaned with soap 

and water. Wetting these elements to clean them could result 

in the printing becoming permanently damaged. In these cases, 

X-GLOO will not accept liability. 

CAUTION: 

Never use solvents, detergent, steam cleaning or 

gasoline! This destroys the cloth.

The X-Gloo should be inspected visually and for functionality at 

least once a year by an expert. This inspection includes inflating 

the X-Gloo Tubes in order to check all pressure-bearing parts for 

tears, punctures, debonding, heat- or chemical damage.

All functions, maintenance, and eventual repairs should only 

be carried out to the degree described in these operating 

instructions. Please contact your X-GLOO Team for repairs 

exceeding these instructions! 

1

2

3

4

For more information, watch our how-to video at:  

www.x-gloo.com/en/experience/videos/

 !

 !