X-Loupe A500 Assay series User Manual - page 10
- 16 -
- 17 -
(6) The battery is fully charged, but lasts for shorter and shorter time:
The lithium battery can only be recharged for certain amount of times, but it will
eventually wear out. Please purchase a new battery from your local distributor.
(7) Hardware malfunctions such as slipped power switch or fatigue pin :
Please contact your local distributor.
(8) Whether it has been varied? (refer to P.12 & 13 of this manual)
And the changes in setting may lead to the function of micro photography is
ineffectual.
How to keep X-Loupe
®
(1) It is advised to use X-Loupe® in a moisture-free environment and keep away from
water.
(2) Keep X-Loupe® in the dry environment such as a dry box, and get some
desiccants inside the storage case/ box.
(3) If you purchased the optional “X-Loupe® specialized carrying case”, just put
it back into the carrying case after using, and get some desiccants inside if
necessary.
c. X-Loupe® is a contact-based digital microscope; therefore, do not take the
picture out of its short working distance.
But it is a way to get a longer working distance only by rotating the preceding
hood of lens clockwisely and carefully and then remove it. (refer to page 5
Demountable lens)
d. After mounting the barrel back, you might need to check the focusing of lens
because the working distance may vary. To solve this, take X-Loupe® to focus
on a flat subject again, and rotate the barrel slightly tighter or looser to adjust
the proper working distance. If the problem is not solved, contact your local
distributor.