X-Loupe A500 Assay series User Manual - page 5
- 6 -
- 7 -
Components
Product Assembly
Contact pins
Demountable lens
(preceding hood)
Mount adapter
(1) Select the magnification lens as desired.
(2) Align the 3 contact pins(- A ) on the back of objective lens to the 3 holes(- B )
on the front side of module(fig.
1
), then attach the lens to the module.
(3) Rotate the lens spiral tooth clockwise until it is tight. But do not over-tighten!
(4) Open the batter cover on the button of module( press the part of C and slide the
battery cover in the direction indicated by the arrow,) and fill in fully-charged
Canon NB-4L Li-ion battery.(fig.
2
)
Caution: NB-4L Li-ion battery charging 4 hrs for the first time; 1.5 hours for
general usage.
(5) Turn on (in the direction of red dot) X-Loupe® module power. It will light up if
handling is correct.
Follow the direction
to fill in battery
Power
1 Mounting of Module and Lens :
Front of Module ( Lens not included)
Back of Objective Lens
Front of Objective Lens
B
2
1
A
C