X-Loupe A500 Assay series User Manual - page 9
- 14 -
- 15 -
Notice and Preparation forMicro-Photography
Troubleshooting
(4) Press the button. the screen will display the 【Main Diagram】 of functions
settings, press the ► button go to next options screen, according to【Sub
diagram】as follows to choose shooting condition.
FUNC.
SET
*3. Changing the ISO Speed
Lowering the ISO speed results in sharper images, but there may be an increased
chance of image blurring in certain shooting conditions. Raising the ISO speed will result
in a faster shutter speed, reducing camera shake and letting the flash reach greater
distances to the subject. The images, however, will appear coarse.
*4. Using the Self-Timer
To reduce the influence of vibration during shooting, please use Self-Timer for better
performance (refer to PowerShot 110HS User Guide Page 58.)
*5. Single shooting is the default setting. In a circumstance where stable posture is hard
to maintain, or the subject is moving or trembling, please choose Continuous Shooting
Mode to take more pictures for getting better results.
*6. The aspect ratio is same as the screen for this camera. The digital zoom (Camera
Manual P.55) is only available in .
Tips:
Troubleshooting
(2) The built-in LED of lens barrel is not bright
(1) About the troubleshooting of camera, please refer to the Camera User Guide.
(3) Error code shown on camera display- the lens barrel of camera can not stretch out
or retract
(4) Could not see the full field of view on the camera monitor
(5) Out of Focus
a. Check the battery power.
b. Disassemble the lens and assemble it back to the module again. Make sure that
the assembling of the lens and module is correct.
c. Check the brightness index of module lighting is not set to zero. If it is, set back
to “entire bright” or the suitable brightness.
a. Turn off the camera power to make the lens retract. Disassemble camera from
the X-Loupe® module, and turn on the power of the camera again.
The lens of the camera should be able to stretch out.
b. If the problem is not solved, contact your local distributor; never try to fix the
camera lens by force because it might void the warranty.
a. Adjust the Zoom of camera to Maximum so that the full field of view can be
obtained.
b. Check the camera lens and make sure that the lens is able to stretch out and
Zoom Function is working.
a. Adjust the direction or posture while shooting.
b. Press the shutter halfway and adjust the distance between the subject and lens
to reach the best focus.
Sub-diagram
Icon
Item
Center Weighted Avg
Vivid
Day Light
Auto
*3
Program
Self-Timer Off
*4
Single Shot
*5
Still Image Aspect Ratio
*6
12M 4000X3000
Fine
1920X1080
Main
Icon
Item
Light Mtetering
My Color
White Balance
ISO Speed
Rec. Mode
Self-Timer
Drive Mode
Still Image Aspect Ratio
Recording Pixels
Compression
Image Quality (Movies)