Xantech IR-X10 Installation Instructions Manual - page 9
Model IR-X10
Page 9
© 2002 Xantech Corporation.
6. The X10 function command is now programmed under button D of the
AUX Source Bank on the virtual controller. Repeat this procedure for
each module you have in the Module Name list. Refer to Figure 4 -
Placing X10 Commands on Controller.
Figure 4 – Placing X10 Commands on Controller
In this case, the X10 command for Lamp Module A2 ‘ON’
was placed on button ‘D’ under the AUX Source Bank.
SCENE CONTROL
The X10 Scene Control feature can also be implemented using Dragon
Drop-IR software. For instance, you can create "scenes" that, with one
button press, can cause several X10 Modules to set lighting to
predetermined levels along with controlling other functions in the A/V system
if so desired. First you need to program a Scene.