Xantech XVCE100IR Installation Instructions Manual - Installation Instructions
Installation Instructions
XVCE100IR Volume Control
The XVCE100IR is a volume control that provides the touch and
feel of an electronic device. With a high-value appeal, no
mechanical rotating or sliding parts are used in this high-power
volume control design. The XVCE100IR is rated to 100 Watts and
provides 12 steps of volume control. Also featured is a built-in IR
eye and “mute” button. The XVCE100IR comes with mounting
screws and a Decora
®
style insert that can be used with the popular
Decora
®
faceplate.
Features and Benefits
Power Handling:100 W/channel RMS
Frequency Response: 20Hz to 20kHz ± 0.5 dB
THD+N: < 1%
Impedance Settings: 1X / 2X / 4X
Minimum Speaker Load: 4 Ohms
Override Current Draw: 0.75mA (logic only)
Sense Current Draw: 25mA
Maximum Current Draw: 40mA
Operating Voltage: 12 Volts DC
Sense Voltage: 9-12 Volts DC
Override Voltage: 9-12 Volts DC
Mounting: Minimum 18 cu. in. J-box or Mud Ring.
Note: Be sure to check fit before choosing J-boxes!