Xantech XVCE100IR Installation Instructions Manual - Other Connections
Manual is about: Volume Control, Electronic, 100W, IR
of
10
Other Connections
Override:
Allows Page/Doorbell signals to override the volume
setting in the XVCE100IR. A HIGH signal will place the XVCE100IR
into a preset volume level. To preset the volume level, find the
desirable volume level with the up and down buttons. Press and
hold the MUTE button. While holding down the MUTE button, press
and hold the VOLUME UP button. When the POWER SENSE LED
starts to blink, the override level is set.
Sense:
When no voltage is found on the sense line, the
XVCE100IR will be in MUTE condition upon power up. Pressing
any button will take the XVCE100IR out of MUTE condition.