Xelaris XT-6 User Manual - page 12
Receiver
Connection
Specifications
Signal
+
-
Signal
+
-
Power Supply
12
The xelaris XR-6 2.4GHz receiver needs a constant power supply between 4.8V and 6V
to work properly. The electric circuit of the receiver must be sufficiently dimensioned to
operate all servos.
There are three ways of power supply:
1. Independent receiver battery
2. BEC of a brushless governor
3. UBEC
WARNING: The power supply should be oversized. A voltage drop to less than 4.8V
leads to an uncontrollable model!
Operating voltage:
4.8V ~ 6V
Power Drain:
<40mA
Weight:
12g
Dimensions:
44mm x 23 mm x 15mm
Channels:
6 Channels
Range:
350m
Battery/Bind
Airplane
Helicopter
Channel 6 / AUX
Channel 5 / Retr. Landing Gear
Channel 4 / Rudder
Channel 3 / Throttle
Channel 2 / Elevator
Channel 1 / Aileron
Battery/Bind
Channel 6 / Pitch
Channel 5 / Gyro
Channel 4 / Yaw
Channel 3 / Throttle
Channel 2 / Elevator
Channel 1 / Roll
www.xelaris.ch