Xerox 4595 User Manual - page 378
Xerox 4595 Copier/Printer User Guide
11-16
11. Problem Solving
The Copy Result is not What was Expected
Described below are solutions for situations in which the copy
result is different from that expected.
The copy is dirty
Cause
The document glass or the document cover is dirty.
No
Action
Clean the document glass or the document cover.
Refer to “Cleaning the Document Cover and
Document Glass” on page 10-18.
Cause
The document is made of highly transparent material
like a transparency.
Action
If the document is highly transparent, marks on the
document cover will be copied. Place a white sheet
of paper on the document and make a copy.
Cause
Color paper, rough paper, or blueprint paper is being
used.
Action
The background color of the paper is copied. Either
adjust the copy density or image quality, or specify
suppress background color, and then retry copying.
Cause
Glossy printing paper is being used.
Action
Glossy printing paper easily sticks to the document
glass, and shadows are sometimes copied and
reproduced as dirt. Place a transparency or highly
transparent film under the document and retry
copying.
Copy is too dark, or too
light
Cause
Copy density is set to
Dark
, or to
Light
.
No
Action
Adjust the copy density.
Refer to “Lighten/Darken” on page 2-26.
Cause
Density of the document is too light.
Action
Adjust the copy density.
Refer to “Lighten/Darken” on page 2-26.
Cause
The
Original Type
is inappropriate.
Action
Copy black text. If it is too light, select Text for
Original Type
.
Refer to “Original Type” on page 2-26.
The copy shifts slightly
Cause
Paper set in the paper tray is misaligned.