Xerox 4595 User Manual - page 408
Xerox 4595 Copier/Printer User Guide
11-46
11. Problem Solving
Remedies are described in this section for situations in which the
following messages are displayed.
127-311
Cause
Detected a fatal error by the controller.
Remedy
Power on/off both the controller and the printer. If the
problem persists, contact the Customer Support Center.
Error Code
Category
Cause and Remedy
C P S M O
Error Code
Message
Category
Cause and Remedy
C P S M O
A malfunction
occurred.
Power-cycle
the machine.
(xxx-yyy)
Cause
An error occurred.
Remedy
Turn off the power, wait until the Touch Screen goes
dark and then turn on power again.
If the message persists, record the displayed contents
for
(xxx-yyy)
. Switch off the machine immediately, wait
for the Touch Screen to go dark and contact the
Customer Support Center.
Completed
with an error.
(xxx-yyy)
Cause
An error occurred and the job completed.
Remedy
Retry operation after waiting for a period.
A fault has
occurred. The
machine has
rebooted.
Select
Close
.
When in doubt,
report the
malfunction to
our Call
Center.
(xxx-yyy)
Cause
An auto-recoverable internal error occurred and the
machine restarted automatically.
Remedy
Select
the
Close
button. The machine is operating
normally now. If the error persists, call contact the
Customer Support Center.