Xerox 4890 Advanced Quick Reference Card - page 2
XEROX
2002 by Xerox Corporation. All rights reserved.
Xerox DocuPrint
4850/4890/92C NPS/IPS
Customer Information
Quick Reference Card
The Xerox DocuPrint 4850/4890/92C NPS/IPS is a highlight
color printing system.
October 2002
721P90000
Special considerations
•
Color toner detection by Optical Character Recognition (OCR)
scanners is wavelength dependent.
•
Appearance of a very small, white transition region between solid
color and solid black images is common to tri-level xerographic
printing.
•
Transference of the black toner to poly-vinyl surfaces is a
common occurrence; color toner does not transfer.
•
Print quality is guaranteed to a range of three to four millimeters
for edge marking and six millimeters for text printing to the edge
of the page.
•
Xerox carbonless paper is approved for DocuPrint 4890/92C only.
Refer to the Xerox Supplies Catalog for the reorder numbers.
•
Appearance of very small spots is a common occurrence on all
xerographic printers. Consult your Xerox service representative
for details on acceptable spot occurrence specifications.
Environmental requirements
•
Operating temperature:
– Recommended: 72
o
+/- 4
o
F (22
o
+/- 2
o
C)
– Min./Max.: 60
o
to 80
o
F (15.5
o
to 26.7
o
C)
•
Humidity:
– Recommended: 45% +/- 10% RH
– Min./Max.: 30% to 65% RH
•
Heat Dissipation (System Control Module): Max. 1,100 BTU/hour
•
Heat Dissipation (Printer Module):
– Standby mode (50/60 Hz): Max 9,100 BTU/hour
– Operating mode (50/60 Hz): Max 14,980 BTU/hour
Electrical requirements
•
System Control Module/HCU or PCI board (60 Hz):
– 115 or 220 VAC
– 15 amp service (for 115 VAC, NEMA 5-15R or
ANSI C73, 11R)
– 0.8 KVA rating
•
System Control Module/HCU or PCI board (50 Hz):
– 100-240 VAC +/- 10%
– 15 amp service
(power connection per local codes/regulations)
– 0.8 KVA rating
•
Printer Module (60 Hz):
– 120/208 or 120/240 VAC
– 30 amp service (NEMA 14-30R)
– 5.5 KVA rating (Operating mode)
•
Printer Module (50 Hz):
– 220, 230, 240 VAC
– 30 amp service
(power connection per local codes/regulations)
– 5.5 KVA rating (Operating mode)
Supplies
Notes:
•
Expected dry ink yield is based on a 5% black and 1.5% color
area coverage. This yield will vary depending on area coverage of
the application and darkness settings of the printer.
•
Use only dry ink that is specified for use in the DocuPrint 4850/
4890/92C printer even when printing non-colored jobs.
•
Purchase of colored dry ink is required to operate your DocuPrint
4850/4890/92C NPS/IPS highlight color system.
A small amount of colored dry ink is consumed even when
printing non-colored jobs, except in the Black Executive mode.
For further information on this topic, consult your local Xerox
service representative.
Reference material
•
Refer to the Helpful Facts About Paper to help in selection of
preprinted forms, perforated stock and labels.
•
Refer to the Highlight Color in Business Documents -- a Practical
Guide for information on how to leverage the business benefits of
HLC documents.
Xerox Color
Reorder
# (US)
Reorder
# (XE)
Cartridges
per Carton
Expected
Yield
(Prints/
Carton)
Dry Ink, Black
6R296
6R90193
6
180,000
Dry Ink, Red
6R297
6R90194
3
270,000
Dry Ink, Blue
6R754
6R90225
3
270,000
Dry Ink, Green
6R299
6R90196
3
270,000
Dry Ink, Cyan
6R755
6R90226
3
270,000
Dry Ink, Magenta 6R816
6R90227
3
270,000
Dry Ink, Royal
6R826
6R90232
3
270,000
Dry Ink, Cardinal
6R825
6R90231
3
270,000
Dry Ink, Violet
6R828
6R90243
3
270,000
Dry Ink, Ruby
6R827
6R90242
3
270,000
Dry Ink, Brown
6R842
6R90245
3
270,000
Fuser Lubricant
8R983
8R983
2 Tubes
240,000
Stitcher Wire
8R1174
8R1174
1 Reel
32,000
Staples