Xerox 6279 Printer User Manual - page 48

If there is no system activity for a period of time specified in the Timers setup, (scanning

documents or screen touches or key presses), a timeout screen will be displayed for four

seconds, and then the user will be logged out automatically.

For more detailed information about Timers setup, see the Configuring Timers section

of this chapter.

Once you are logged in as an Administrator, you are able to view and make changes on

the Administration tab of the Machine Info screen.

NOTE

The buttons on the Administration tab may require an administrator log in. If

you are logged out, the system will prompt for the System Administrator password

if one of these buttons is selected and access is denied.

Exiting System Administration Mode

To exit the System Administration mode:

1. Select the Log In/Out button to access the System Administrator screen.

2. Select System Administrator Log Out.

3. Select Yes to confirm that you wish to log out.

The system will exit System Administration mode and the Guest icon will appear in the

upper right corner of the screen.

General Administration Settings

The General Administration settings enable you to display and set the time on the

machine, change the administrator password, shut down and restart the system, and

perform job accounting tasks. If you are not already logged in, you will be prompted to

enter a System Administrator password to access the General Administration settings.

The General Administration option provides the following functions:

• Setting the date and time

• Changing the administrator password

• Configuring Job Accounting

• Configure Job Reprint

• Shutting down and restarting the system

• Enabling/Disabling Immediate Image Overwrite

• Set Thumbnail Creation

• Enable/Disable Admin Managed Queue

Xerox

®

 6279

®

 Wide Format Solution

3-4

Printer User Guide

System Administration