Xerox 721 Setup Manual - page 12
8
FreeFlow Accxes Printer System and Web Print Management Tool Setup Guide
XEROX WIDE FORMAT 6030/6050 Print System:
Print Server Enablement Feature Key – Enables print and copy mode for
a remote printer.
XEROX WIDE FORMAT Printers and Scan Systems:
Job Accounting Feature Key – Job accounting enables the tracking of
media usage data. The Account Management Tool (AMT), or some other
external accounting tool, is used to assign a User ID, Account ID, and
Printer ID. It then collects and tallies the stored data from the printers.
PostScript Feature Key – This enables the interpretation of Adobe Post
Script 3, PDF 1.4, 1.5, and 1.6 for the YKE/YKE-N controller, and PDF 1.3
for all other controllers.
Disk Image Overwrite Feature Key – Enables the security options for
overwriting image data on the hard drive.
OS Enablement Feature Key – Enables the YKE/YKE-N controller to
print, copy, and scan.
AutoCAD – Supports the DWG, DWF, and DXF file formats generated by
Autodesk applications. Enables printing of AutoDesk DWF format files.
Requires an Advanced Network Hardware Address and a Machine ID.
XEROX WIDE FORMAT 6204 Print System:
6204 5D– Use to enable 5 D size prints per minute printing speed.
Requires an Advanced Network Hardware Address and a Machine ID.
XEROX WIDE FORMAT 510 Print System:
Drawer 2 Feature Key– Use to enable usage of the second roll feed
drawer for operation.
Drawer 3 Feature Key– Use to enable usage of the third roll feed drawer
for operation.
7D Feature Key– Use to enable operational speed of 7 D size prints per
minute.
10D Feature Key– Use to enable operational speed of 10 D size prints per
minute.
PRINT ENGINE CONFIGURATION
This section shows the FreeFlow Accxes firmware version, the IOT hardware
address, the paper roll drawers that are present, the language, if a finisher is
attached, resolution (DPI), power saver minutes, and media usage.
INSTALLED MEDIA
This section lists the size and type of media installed in the printer.
SCANNER CONFIGURATION