Xerox 8264E User Manual - page 16

Unwinder / Winder Operation 

2-6 

8264E Color Wide Format Printer 100kg Unwinder / Winder 

 User 

Guide 

No. 

Part Name 

1. AC 

inlet 

2. Power 

cable 

3.  Insert the AC power cable plug to an AC power outlet. 

Turning the Power ON and OFF 

The following section provides procedures for setting the Unwinder / Winder power ON and 

OFF. 

Turning the Power ON 

Turn the power ON by following the instructions below. 

1.  Set the Unwinder / Winder power switch to the ON position. The operation lamp will light. 

Figure 10. Set the Power Switch to the ON Position 

No. 

Part Name 

1. 

Unwinder / Winder Power Switch