Xerox 8264E User Manual - page 5

8264E Color Wide Format Printer 100kg Unwinder / Winder 

1-1 

User Guide 

1

1 

Safety and Warning 

Label Information 

Safety Considerations 

Various procedures throughout this user guide may list 2 levels of safety indicators that need 

to be adhered to during the performance of a procedure.  These indicators take into account 

the level of danger or the size of the potential incidence that can occur while performing a 

step in a procedure. Below is a list of these indicators and their meaning as they apply to this 

user guide. 

CAUTION  

Used for a potentially dangerous situation that could lead to small to medium-sized damage, 

or when a part or the entire product may be damaged. 

Note  

Used for information that should be noticed or emphasized. 

Warning Labels 

This section explains the different types of warning labels and where they are located.  

Warning labels are applied to the product in places where special attention is required.  Please 

ensure that you understand the exact locations of such parts and the contents of the danger 

before operating this product. 

Note 

Make sure you can read all the contents on a warning label.  

If some of words or diagrams cannot be read, please clean the label.  

To remove dirt from the warning labels, please use a cloth, water, and mild detergent.  

Do not use organic solvents or gasoline to clean the labels. 

Warning labels must be replaced if damaged, lost, or cannot be read.  

Contact your local Xerox Representative if an warning label needs to be replaced.