Xerox apeosport 350 I Network Administration Manual - Interface Cables

2 Product Overview

26

Product Overview

2

Interface Cables 

When connecting the machine directly to a computer, use either the parallel interface 

or USB interface. When connecting to a network, use the Ethernet interface.

Using the Parallel Interface

This section describes the installation procedure for the parallel interface.

Note

• When connecting with a computer using parallel interface, our parallel interface cable 

(optional) is required. For details, contact our Customer Support Center.

1

Confirm that the machine is off.

2

Insert the connector of the interface 

cable into the machine’s parallel 

interface connector and fasten it 

with the clips on either side of the 

connector.

3

Connect the other end of the 

interface cable to a computer.

4

Switch on the machine.

5

Restart the computer.

For details of setting items, refer to "Installation When Using Parallel Port" (P.37).

Using the USB Interface

The USB interface (optional) supports USB 2.0. 

This section describes the installation procedure for the USB interface.

1

Confirm that the machine is off.

2

Connect a USB interface cable to 

the USB 2.0 interface connector on 

the side of the machine.

3

Connect the other end of the USB 

interface cable to a computer.

4

Switch on the machine.

5

Restart the computer.

For details of setting items, refer to "Installation When Using USB Port" (P.41).

Parallel

USB 2.0