Xerox apeosport 350 I Network Administration Manual - page 65
Installation Procedure
63
Ins
talla
tion When Us
ing Et
herTalk
9
5
After the machine is restarted, print out [Settings List] to confirm that the EtherTalk
port is enabled.
For information on how to print a settings list, refer to "Print Report/List" under "Chapter 13 Machine
Status" in the User Guide.
Configure other EtherTalk settings as necessary. Refer to "EtherTalk" (P.73) for EtherTalk
configuration.
Configuration on the Computer
The following describes the configuration procedure for the computer.
In order to print from the machine, the computer needs to have a print driver installed.
For information on the supported operating systems, refer to "Supported Operating Systems" (P.19).
Refer to the manual contained in the CD-ROM included in the PostScript 3 Kit.