Xerox Color C75 Press User Manual - page 144
027-746
Cause: The specified job template pool server protocol settings are incorrect.
Remedy: Set up the correct port.
027-750
Cause: Attempted to command a job flow to a print document. Print documents are
not supported by job flows.
Remedy: Check the document before starting the job flow.
027-751
Cause: When following the job flow, an error occurred.
Remedy: Check the settings for the job flow.
027-770
Cause: The print data cannot be processed because of PDL error.
Remedy: Check the print data and try to print again.
027-771
Cause: A disk full error occurred.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
047-210
Cause: An error occurred with the offset stacking module.
Remedy: Power-cycle the machine. If the machine is not improved by performing the
relevant remedy, contact your Xerox Customer Support Center.
047-320
Cause: A communication error has occurred with the Finisher.
Remedy: Power off/on the machine. If the error continues, contact your Xerox Customer
Support Center.
062-210
Cause: The document feeder malfunctioned.
Remedy: Contact your Xerox Customer Support Center.
062-211
Cause: An error occurred in the document feeder.
Remedy: Contact your Xerox Customer Support Center.
062-220
Cause: The document feeder malfunctioned.
Remedy: Contact your Xerox Customer Support Center.
Xerox
®
Color C75 Press
10-24
User Guide
Problem solving