Xerox Color C75 Press User Manual - page 17
Here are two examples:
• If the Low Power Mode is set to 15 minutes and Sleep Mode is set to 60 minutes,
Sleep Mode activates after 60 minutes of total inactivity and not 60 minutes after
the Low Power Mode begins.
• If the Low Power Mode is set to 15 minutes and the Sleep mode is set to 20 minutes,
the Sleep Mode activates 5 minutes after the Low Power Mode begins.
Note
To manually enter power saver, press the Energy Saver button on the UI.
When logged on as administrator, the time periods for both Low Power and Sleep Mode
may be set from Tools > System Settings > Common Service Settings > Energy
Saver Settings.
Exiting the Energy Saver mode
1. Press the Energy Saver button, or
2. Send a print job to the machine or make copies at the machine.
Locating the machine serial number
The machine serial number can be accessed from either the machine UI or by locating
it on the inside of the machine.
1. Press the Machine Status button on the UI.
2. Ensure that the Machine Information tab is displayed.
The machine serial number is found here.
3. The machine serial number can also be found on the serial number plate inside the
front door/cover of the machine.
Feeding and finishing devices
Available with your machine is a variety of optional feeding and finishing devices. These
devices are briefly discussed on the following pages along with where to find specific
information on each device.
1-7
Xerox
®
Color C75 Press
User Guide
Product overview