Xerox Color C75 Press User Manual - page 208
Finishing problems
The following are some of the problems that may occur when using the Advanced Finisher
or Professional Finisher.
• The finisher malfunctioned: Check for any obstructions in the paper path and clear
them. Power off and on the machine, and if necessary, resend or restart your print
job. If the fault continues, contact the Customer Service Support Center.
• Finisher staple fault: Check staples and reset correctly.
• Finisher staple feeding is not ready: Check staples and reset correctly.
• The staple cartridge is empty: Check staples. Follow the procedure to remove and
replace the staple cartridge.
• The finisher stacker tray is full: Remove all paper from the stacker tray.
• The finisher top tray is full: Remove all paper from the finisher top tray.
• The finisher stacker tray lower safety warning is on: Remove all paper from the
stacker tray and remove any other obstructions.
• The finisher booklet tray is full: Remove all paper from the booklet tray.
Xerox
®
Color C75 Press
14-4
User Guide
Advanced/Professional Finishers