Xerox CopyCentre 232 Supplementary Manual - page 4
1
Introduction
2
Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement
Copied jobs
The
Insert
feature is used for producing copied sets with imaged or non-imaged tab
dividers.
This feature, located on the
Basic Copying, Job Assembly
tab enables you to insert tab
stock into your copied sets and
print onto the tabs.
The screen contains instructions
for loading the tab stock into the
paper trays and the controls for
selecting the position of your tab stock in your final sets.
The
Job Build
feature is used to:
– copy jobs that exceed 70 pages
– copy an original document that has tab dividers.
Using this supplement
The instructions in this booklet will help you print and copy tab dividers:
Specifications
Type of Job
Go to section...
Copy onto tabs only
Copying onto tabs – page 7
Copy onto tabs automatically collated into the
copied sets
Copying onto tabs – page 7
Make a copy of a document that has printed
tab dividers
Copying using Build Job – page 12
Print onto tabs only
Printing onto tabs – page 14
Print onto tabs as automatically collated into
the printed sets
Printing onto tabs – page 14
Parameter
Specification
Paper Trays
Tab stock can only be loaded into
the Bypass Tray, Tray 1 or Tray 2
Tab Stock Sizes
A4, 8.5 x11 inches (9 x 11 inches)
Number of tabs per set
40
Number of tab positions
up to 5
Weight of tab stock
200 g/m² or 53lb stock
5, 19,