Xerox Digital Color Press 700 User Manual - Hints and Tips

Xerox 700 Digital Color Press User Guide

Problem Solving

8-47

Many of the special media types (i.e. all Coated 

papers, Labels and Heavyweight 2 papers) 

should be fed face-up (non-inverted). If they are 

mistakenly fed face-down, jams are very likely 

to occur at the entrance to the Inverter. Many of 

these jams can result in Fuser damage. Setting 

the media type by the GSM is important.  

When selecting the media, note the GSM of 

the paper and select the proper paper type 

(mode).

Hints and Tips

Fuser

 64 to 105 gsm

 Plain Mode

 106 to 176 gsm 

 Heavyweight 1 or Coated 1 Mode

 177 to 220 gsm

 Heavyweight 2 or Coated 2 Mode

 221 to 300 gsm

 Heavyweight 2 or Coated 2 Mode

Note: Setting the media type on the machine 

UI does not apply to printing from the 

customer’s desktop. If the customer attempts to 

send a print job and selects “Use Machine 

Settings” in the print properties screen, then it is 

possible that the media type may not be the 

correct weight in the paper tray, and may lead 

to Fuser or Inverter jams.  Therefore, it is 

recommended that the customer select the 

proper media type from the print driver, and 

never select “Use Machine Settings”.

Preventing Fuser Jams