Xerox Digital Color Press 700 User Manual - page 212

Accessories

Xerox 700 Digital Color Press User Guide

10-4

HCS Trays

Sample prints can be printed by performing the 

following steps:

1.From the [Copy Output] feature, select:

Collated or Uncollated

•

Output Destination/Offset Stacker

•

2.Select [Stacker - Stacker Cart] then [Real Time 

Sample Job].

3.Select [Sample Job On].The [Sample Job On] 

feature delivers specific pages or sets of an output 

job to the High Capacity Stacker’s Top Tray.The 

Sample Job allows the user to check the output 

while continuing to deliver the major portion of the 

job to the Stacker Cart.

For Collated output, for example, if the output 

•

is 100 sets of a 50-page original document, 

the user can choose 1-3 output sample sets.

For Uncollated output, for example, if the 

•

output is 100 copies of each page of a 50

-page original document, the user can 

choose 1-3 sample pages4.Enter the desired 

Sample pages/sets to print for the [First 

Sample] and then for the [Second Sample] 

and [ThirdSample] (if applicable).5.Select 

[Save].

Sample Print feature

Top Tray

The Top Tray offers the following:

Copies/prints are aligned easily without folds 

•

or winkles in the output.

To enable easier pick-up of the ouput 

•

copies/prints, the HCS can be stopped by 

selecting the Stop button on the machine's 

UI.