Xerox DocuMate 4760 User Manual - page 111

Xerox

®

 DocuMate

®

 4760

User’s Guide

111

6.

Select the scan configuration you want to use for scanning in the 

Select configuration

 list.

Click on the 

Edit

 button to open the Scan Configuration Properties window to configure any destination 

specific scanning options. 

Each destination that has per-scan configuration properties will be represented by its configuration tab in the 

OneTouch Scan Configuration Properties window. Please refer to the destination instructions, as described in 

the previous section(s), for configuring destination specific options.

Click on 

OK

 when you are done making changes in this window.

7.

Click on 

OK

 on the OneTouch Properties window.

8.

Load the document(s) in the scanner and start scanning with the button you set to scan to multiple 

destinations. 

The scanner starts scanning and when finished, the image is sent to each destination you selected in the OneTouch 

Properties window.

Technical Note

•

The 

Still Image Client

 destination cannot be used with multiple destination scanning. This destination will be 

disabled when the 

Enable scanning to multiple destinations

 is selected.