Xerox DocuMate 4760 User Manual - page 51
Xerox
®
DocuMate
®
4760
User’s Guide
51
7.
Select a scanning configuration in the
Select configuration
list.
The configuration’s basic settings include: scanning mode, resolution (dpi), page size, brightness (Br), and
contrast (Cr). To see a selected scan configuration’s settings, click its icon. Click the icon again to close the
detailed information. Refer to
Scan Configurations
on page 55 and
Configure Before Scan
on page 67 for
instructions on creating and modifying scan configurations.
8.
Click on
OK
to save the changes.
9.
Place an item in the scanner and click the OneTouch button to start scanning.
The scanner scans and sends the image to the selected destination, with the file format and scan configuration you
specified.
Properties
button
—displays a window for selecting properties for a destination. This button is disabled if the
selected destination application does not have global configuration properties.
Refresh
button
—updates the links between all your computer’s Destination Applications and OneTouch. If you
install new software that can be used as a Destination Application, click the
Refresh
button to link the new software
to OneTouch.
New
/
Copy
/
Edit
/
Delete
buttons
—click
New
or
Copy
to add new scan configurations to the list. Click
Edit
or
Delete
to change or remove them.
OK
/
Cancel
/
Apply
buttons
—
OK
accepts any changes and closes the window.
Apply
accepts any changes but
leaves the window open so you can continue making additional changes.
Cancel
closes the window without
accepting any changes.