Xerox DocuMate 4760 User Manual - page 145
Xerox
®
DocuMate
®
4760
User’s Guide
145
Click the drop down menu to select the scanning options you want to use.
The available color modes are:
•
Automatic
determines the color of the document as it is being scanned.
•
Color
scans the document in color, creating a full color copy of an original document or photograph. Color
scans have the largest file size.
•
Gray
scans the document using varying shades of gray to reproduce the document. The grayscale scan mode
is often used when scanning documents or graphics where the original color does not need to be retained, but
the graphics need to be legible. Grayscale scanning preserves the graphic quality while keeping the file size less
than that of a full color scan.
•
Black and White
scans the document in bitonal where everything on the page is either black or white. This
setting is often used when scanning typed or written documents. When there are not a lot of graphics, or if the
graphics are not needed, this setting is ideal for archiving documents to a server or on a disc, send through
email, or posting to a web page, as the file size is smaller than the other scanning modes.
Sides identical
If the scanner supports two-sided (duplex) scanning, you can individually set the color mode and other options in
the scanner interface for each side of the page. This option is always selected and grayed out if the scanner
hardware does not support the feature.
While the option to enable or disable
Sides identical
is in the source configuration list, the color mode is not the
only option that can be individually configured for each side. Other options in the scanner interface, such as
resolution, brightness, contrast, etc... will also be individually set for each source. After you deselect
Sides identical
,
any changes you make in the scanner interface will only be applied to the option that appears at the top of the list
(for example, “Input tray (Front side) Color”).
To set the scanner options individually for each side:
1.
Click the drop down menu and deselect
Sides identical
.
2.
Select the color mode you want for the first side.
(Example: Sides are identical)
(Example: Sides are different)