Xerox DocuMate 4760 User Manual - page 61
Xerox
®
DocuMate
®
4760
User’s Guide
61
•
Both
—select this option if you want to specify an area that appears in the same place on both sides of the
page, such as a company logo, so you don’t have to specify the same area separately for both the front and
back.
Click one time on the default value, 0.00 in each field, to enable the control box for you to input the start position
and redaction area size. The units of measurement is displayed on the lower-right corner next to the Paper size field.
•
From left
—input the upper-left corner start position measured from the left-side of the page.
•
From top
—input the upper-left corner start position measured from the top of the page.
•
Width
—input the width of the area to be removed.
•
Height
—input the height of the area to be removed.
Color
—this color field shows the selected fill color for the redacted area(s). When the software removes the area
you specify, it fills the area with the color you have selected here. To change the color, click the artist palette button
to open the Windows color palette. Select the color you want then click on
OK
. The color you selected will now
display in the
Color
field on the Redaction Settings tab.