- DL manuals
- Xerox
- Copier
- Document Centre 50
- User Manual
Xerox Document Centre 50 User Manual
Summary of Document Centre 50
Page 2
© 1999, 2000 xerox corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs that...
Page 3: Safety Notes
Document centre cs 50 user guide iii safety notes 1 2 3 4 5 6 7 safety notes the xerox document centre colorseries 50 copier/printer and the recommended maintenance supplies have been designed and tested to meet strict safety requirements. Attention to the following notes will ensure the continued s...
Page 4
Safety notes iv document centre cs 50 user guide 1 2 3 4 5 6 7 warning: never push objects of any kind into slots or openings on this equipment. Making a contact with a voltage point or shorting out a part could result in fire or electrical shock. • if any of the following conditions occur, switch o...
Page 5: Laser Safety
Document centre cs 50 user guide v safety notes 1 2 3 4 5 6 7 laser safety caution: use of controls, adjustments, or procedures other than those specified in this documentation may result in a hazardous exposure to laser radiation. This equipment complies with international safety standards. With sp...
Page 6: Maintenance Safety
Safety notes vi document centre cs 50 user guide 1 2 3 4 5 6 7 maintenance safety • do not attempt any maintenance procedure that is not specifically described in the documentation that is supplied with your copier/printer. • do not use aerosol cleaners. The use of supplies that are not approved may...
Page 7: Operational Safety
Document centre cs 50 user guide vii safety notes 1 2 3 4 5 6 7 operational safety your xerox equipment and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards. Your attention...
Page 8: Ozone Safety
Safety notes viii document centre cs 50 user guide 1 2 3 4 5 6 7 • do not locate the machine in line with the cold air flow from an air conditioning system. • do not place containers of coffee or other liquid on the machine. • do not block or cover the slots and openings on the machine. Without adeq...
Page 9: Notices
Document centre cs 50 user guide ix notices 1 2 3 4 5 6 7 notices radio frequency emissions fcc this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against ha...
Page 10
Notices x document centre cs 50 user guide 1 2 3 4 5 6 7 shielded cables must be used with this equipment to maintain compliance with fcc regulations. In canada this digital apparatus does not exceed the class b limits for radio noise emissions from digital apparatus as defined in the radio interfer...
Page 11
Document centre cs 50 user guide xi notices 1 2 3 4 5 6 7 safety extra low voltage approval the xerox document centre colorseries 50 copier/printer is in compliance with various governmental agencies and national safety regulations. All system ports meet the safety extra low voltage (selv) circuits ...
Page 12
Notices xii document centre cs 50 user guide 1 2 3 4 5 6 7 certifications . . . In europe the ce marking that is applied to this product symbolizes xerox europe’s declaration of conformity with the following applicable directives of the european union as of the dates indicated: january 1, 1995: - co...
Page 13
Document centre cs 50 user guide xiii notices 1 2 3 4 5 6 7 the following applies to the product when equipped with token ring or banyan vines connectivity options: warning: this is a class a product. In a domestic environment, this product may cause radio interference, in which case the user may be...
Page 14
Notices xiv document centre cs 50 user guide 1 2 3 4 5 6 7 it’s illegal . . . In the usa congress, by statute, has forbidden the copying of the following subjects under certain circumstances. Penalties of fine or imprisonment may be imposed on those guilty of making such copies. 1. Obligations or se...
Page 15
Document centre cs 50 user guide xv notices 1 2 3 4 5 6 7 2. Adjusted compensation certificates for veter- ans of the world wars. 3. Obligations or securities of any foreign gov- ernment, bank, or corporation. 4. Copyrighted material, unless permission of the copyright owner has been obtained or the...
Page 16
Notices xvi document centre cs 50 user guide 1 2 3 4 5 6 7 it’s illegal . . . In canada parliament, by statute, has forbidden the copying of the following subjects under certain circumstances. Penalties of fines or imprisonment may be imposed on those guilty of making such copies. 1. Current bank no...
Page 17
Document centre cs 50 user guide xvii notices 1 2 3 4 5 6 7 environmental notices . . . In the usa as an energy star ® partner, xerox corporation has determined that this copier/printer model meets the energy star ® guidelines for energy efficiency. Energy star ® is a us registered trademark. The en...
Page 18
Notices xviii document centre cs 50 user guide 1 2 3 4 5 6 7 environmental notices . . . In canada as a participant in the environmental choice program, xerox corporation has determined that this copier/printer model meets the environmental choice guidelines for energy efficiency. Environment canada...
Page 19: Contents
Document centre cs 50 user guide xix 1 2 3 4 5 6 7 safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Iii electrical safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Iii laser safety . ....
Page 20
Document centre cs 50 user guide xx 1 2 3 4 5 6 7 1 about this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 manual contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1. About the manual . . . . . . ....
Page 21
Document centre cs 50 user guide xxi 1 2 3 4 5 6 7 3 making copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 power on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 switching the power on . . . ....
Page 22
Document centre cs 50 user guide xxii 1 2 3 4 5 6 7 5 added features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 2 sided copying . . . . . ....
Page 23
Document centre cs 50 user guide xxiii 1 2 3 4 5 6 7 7 output formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 multiple-up . . . . . . ....
Page 24
Xxiv document centre cs 50 user guide 1 2 3 4 5 6 7 10 duplex automatic document feeder . . . . . . . . . . . . . . . . . . . 10-1 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 component names and functions . . . . . . . ....
Page 25
Document centre cs 50 user guide xxv 1 2 3 4 5 6 7 14 technical information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1 specifications . . . . . . . . ....
Page 26
Xxvi document centre cs 50 user guide 1 2 3 4 5 6 7.
Page 27: About This Manual
Document centre cs 50 user guide 1–1 about this manual 2 3 4 5 6 7 1 1 about this manual the document centre colorseries 50, illustrated in figure 1, may be used as a standalone copier or a copier/printer. The purpose of this manual is to introduce you to the various copying procedures and features ...
Page 28: Manual Contents
About this manual 1–2 document centre cs 50 user guide 2 3 4 5 6 7 1 manual contents this manual is divided into 15 chapters, as described below. Key point: features and options discussed in each chapter reflect the factory default settings. You may see different settings, depending on the options y...
Page 29
Document centre cs 50 user guide 1–3 about this manual 2 3 4 5 6 7 1 the overview serves a two-fold purpose: • it reviews the basic process of making copies, including selecting features and options, placing the original on the document glass or in the dadf, pushing the start button, and removing yo...
Page 30
About this manual 1–4 document centre cs 50 user guide 2 3 4 5 6 7 1 5. Added features chapter 5 includes information and procedures for the factory default features that display on the added features tab: • 2 sided copying • book copying • margin shift • edge erase • original size • mixed size orig...
Page 31
Document centre cs 50 user guide 1–5 about this manual 2 3 4 5 6 7 1 7. Output formats chapter 7 includes information and procedures for the features that affect special copy requirements. These features display on the output formats tab: • multiple-up • repeat image • transparency separators • cove...
Page 32
About this manual 1–6 document centre cs 50 user guide 2 3 4 5 6 7 1 10. Duplex automatic document feeder chapter 10 describes the duplex automatic document feeder by providing component names and functions, document specifications, and an overview of the document path. Safety precautions and instru...
Page 33
Document centre cs 50 user guide 1–7 about this manual 2 3 4 5 6 7 1 14. Technical information chapter 14 provides the specifications, requirements, capabilities, physical characteristics, estimated copy rates, and health and safety information for the copier/printer. Specifications for the dadf, th...
Page 34
About this manual 1–8 document centre cs 50 user guide 2 3 4 5 6 7 1 conventions used in this manual descriptions of features and options generally precede procedure steps. You may need to combine several procedures to achieve your desired results. This manual uses a number of symbols to help you id...
Page 35: Introduction
Document centre cs 50 user guide 2–1 getting to know your copier/printer 1 3 4 5 6 7 2 2 getting to know your copier/printer introduction the document centre colorseries 50 copier/ printer, figure 1, provides full-color, digital imaging at approximately 12 color copies and 50 black and white copies ...
Page 36: Control Panel
Getting to know your copier/printer 2–2 document centre cs 50 user guide 2 3 4 5 6 7 2 control panel use the control panel to program the copier/ printer for individual jobs. Figure 2: control panel as illustrated in figure 2, you will use the contrast dial (a) to make the touch screen (b) brighter ...
Page 37: Control Panel Buttons
Document centre cs 50 user guide 2–3 getting to know your copier/printer 1 3 4 5 6 7 2 control panel buttons the function of the control panel hard buttons is described below. The numbers before the descriptions correspond to the numbered call-outs in figure 3. 1 numeric keypad - buttons 0 to 9 are ...
Page 38
Getting to know your copier/printer 2–4 document centre cs 50 user guide 2 3 4 5 6 7 2 4 energy saver button - press this button to initiate the enerfy saver mode. The document centre colorseries 50 will also go into energy saver mode automatically if it is not used for a length of time specified by...
Page 39
Document centre cs 50 user guide 2–5 getting to know your copier/printer 1 3 4 5 6 7 2 6 clear all - press this button to clear all programming, including the copy quantity. All features are reset to their respective default settings. When the clear all button is selected in interrupt mode, default ...
Page 40
Getting to know your copier/printer 2–6 document centre cs 50 user guide 2 3 4 5 6 7 2 9 clear (c) - pressing the clear (c) button, while programming a job, will reset the number of completed copies or sets back to 1. When the clear button has been pressed, all preselected features remain and you ma...
Page 41: Touch Screen
Document centre cs 50 user guide 2–7 getting to know your copier/printer 1 3 4 5 6 7 2 touch screen the touch screen can be used to select features and options that specify what kind of copy output you desire. It also displays messages that indicate the copier/ printer status during idle, run, or fa...
Page 42
Getting to know your copier/printer 2–8 document centre cs 50 user guide 2 3 4 5 6 7 2 feature tabs the touch screen displays five feature tabs you use to program the copier/printer: • basic copying • added features • image quality • output formats • job assembly the five feature tabs on the touch s...
Page 43
Document centre cs 50 user guide 2–9 getting to know your copier/printer 1 3 4 5 6 7 2 touch screen button types and functions touch screen buttons are selectable and shadowed. These buttons change appearance when selected. The standard button types are described and illustrated below: some buttons ...
Page 44
Getting to know your copier/printer 2–10 document centre cs 50 user guide 2 3 4 5 6 7 2 arrow buttons arrow buttons allow you to change values on the control panel for features such as variable reduce/enlarge, as illustrated in figure 8. Touch the up or right arrow to increase the value; touch the d...
Page 45
Document centre cs 50 user guide 2–11 getting to know your copier/printer 1 3 4 5 6 7 2 using the touch screen figure 11: the touch screen the copier/printer defaults to the basic copying tab, as illustrated in figure 11. Touch the visible part of the tab to access the features for added features, i...
Page 46: Audio Tones
Getting to know your copier/printer 2–12 document centre cs 50 user guide 2 3 4 5 6 7 2 audio tones the copier/printer provides four types of audio tones to assist the operator in using the copier/ printer. The system administrator can adjust the volume of some of the audio tones using tools mode. •...
Page 47
Document centre cs 50 user guide 2–13 getting to know your copier/printer 1 3 4 5 6 7 2 document feeder and document glass duplex automatic document feeder (dadf) the duplex automatic document feeder (dadf), figure 12, acts like a document cover by shielding the scanner from external light. Key poin...
Page 48
Getting to know your copier/printer 2–14 document centre cs 50 user guide 2 3 4 5 6 7 2 document glass after you have selected the desired features, you should place the original document onto the document glass. Raise the duplex automatic document feeder and place (register) the document in the cor...
Page 49: Auto Image Rotation
Document centre cs 50 user guide 2–15 getting to know your copier/printer 1 3 4 5 6 7 2 auto image rotation the document centre colorseries 50 offers an automatic rotation feature for 8.5 x 11 inch, or a4, original documents input from both the duplex automatic document feeder and the document glass...
Page 50: White Border Edges On Copies
Getting to know your copier/printer 2–16 document centre cs 50 user guide 2 3 4 5 6 7 2 white border edges on copies all copies made on the document centre colorseries 50 have white border edges on four sides of the copy, as illustrated in figure 17. There is a factory setting which removes 2 mm fro...
Page 51: Paper Trays And Paper Path
Document centre cs 50 user guide 2–17 getting to know your copier/printer 1 3 4 5 6 7 2 paper trays and paper path paper trays paper trays 1, 2, 3, and 4 are located at the lower front of the copier/printer, as illustrated in figure 15. Paper tray 5 (soemtimes called the bypass tray or multiple shee...
Page 52
Getting to know your copier/printer 2–18 document centre cs 50 user guide 2 3 4 5 6 7 2 paper path areas 1 paper tray 1 2 paper tray 2 3 paper tray 3 4 paper tray 4 5 paper tray 5 6 preregistration area 7 transfer belt 8 fuser 9 output tray, sorter/mailbox or finisher/mailbox 10 duplex path (10a, 10...
Page 53
Document centre cs 50 user guide 2–19 getting to know your copier/printer 1 3 4 5 6 7 2 output delivery output is delivered differently, depending on the configuration of your system and on the job options you choose. If you use the document glass to input the original document, the requested number...
Page 54: Dry Ink (Toner)
Getting to know your copier/printer 2–20 document centre cs 50 user guide 2 3 4 5 6 7 2 dry ink (toner) the document centre colorseries 50 copier/ printer has a four-color development system that uses a combination of dry inks (toners) to produce the output colors. The dry ink colors are magenta, cy...
Page 55: Options and Accessories
Document centre cs 50 user guide 2–21 getting to know your copier/printer 1 3 4 5 6 7 2 options and accessories table 1 lists the optional equipment and standard accessories for the document centre colorseries 50 copier/printer. For more information about any one of the above accessories and/or for ...
Page 56: Safety Features
Getting to know your copier/printer 2–22 document centre cs 50 user guide 2 3 4 5 6 7 2 safety features the document centre colorseries 50 copier/ printer is equipped with a safety feature called a ground fault protector, figure 18. This device removes all electrical power to the copier/printer if a...
Page 57: Moving The Copier/printer
Document centre cs 50 user guide 2–23 getting to know your copier/printer 1 3 4 5 6 7 2 moving the copier/printer the document centre colorseries 50 copier/ printer should not be moved after it has been installed. Improperly moving the copier/printer may damage the equipment, carpet or floor. Lf you...
Page 58
Getting to know your copier/printer 2–24 document centre cs 50 user guide 2 3 4 5 6 7 2.
Page 59: Making Copies
Document centre cs 50 user guide 3–1 making copies 1 2 4 5 6 7 3 3 making copies this chapter includes a brief introduction to the various features available to you when making copies with the document centre colorseries 50. It also includes a procedure that quickly leads you through some of these f...
Page 60: Power On And Off
Making copies 3–2 document centre cs 50 user guide 2 3 4 5 6 7 3 power on and off switching the power on press the power switch to the on position to switch the copier/printer on. A message will display asking you to wait. After the power switch is pressed to on, the copier/printer takes approximate...
Page 61: Loading Paper
Document centre cs 50 user guide 3–3 making copies 1 2 4 5 6 7 3 loading paper paper trays 1, 2, 3, or 4 1 pull out the paper tray. 2 place the appropriate paper into the tray, as illustrated in figure 2. Adjust the paper guides. You can not adjust the guides for tray 1. Contact a xerox service repr...
Page 62
Making copies 3–4 document centre cs 50 user guide 2 3 4 5 6 7 3 paper tray 5 paper tray 5 is located on the left side of the copier/printer. Paper tray 5 is used for transparencies, heavy weight papers, and non- standard size paper. A maximum of 100 sheets of 20 lb (75 gsm) paper may be loaded into...
Page 63: Quick Copy
Document centre cs 50 user guide 3–5 making copies 1 2 4 5 6 7 3 quick copy the procedure below helps you make simple copies without changing any options. 1 press the clear all (ca) button to clear any previous programming. 2 perform one of the following: • raise the duplex automatic document feeder...
Page 64
Making copies 3–6 document centre cs 50 user guide 2 3 4 5 6 7 3 3 press the start button. 4 when copying is completed, perform the following: • remove the copies from the output tray, sorter/mailbox or the finisher/mailbox on the right side of the copier/printer. • remove the original document(s) f...
Page 65
Document centre cs 50 user guide 3–7 making copies 1 2 4 5 6 7 3 making copies using features the feature tabs on the touch screen (figure 6) enable you to configure the copier/printer to suit your copying needs. The procedure below leads you quickly through a number of features you may want to use ...
Page 66
Making copies 3–8 document centre cs 50 user guide 2 3 4 5 6 7 3 3 select an option in the output color feature if a setting other than the default, auto color, is desired. Auto color enables the copier/printer to select either full color or black and white to use for the output. This feature will r...
Page 67
Document centre cs 50 user guide 3–9 making copies 1 2 4 5 6 7 3 5 select an option in the reduce/enlarge feature if a setting other than the default (100%) is desired. Perform one of the following: • touch the desired reduce/enlarge option on the basic copying tab. • touch more... To see additional...
Page 68
Making copies 3–10 document centre cs 50 user guide 2 3 4 5 6 7 3 7 touch the added features tab and touch the original size button to display the original size screen, figure 12. Touch a standard option for original size or use the horizontal and vertical arrows to set a non- standard size if a set...
Page 69
Document centre cs 50 user guide 3–11 making copies 1 2 4 5 6 7 3 – 2 to 2 sided button for two-sided copies from two-sided input. Select the side 2 rotate button to display the side 2 rotate screen, illustrated in figure 15. You must specify the original orientation and the copy orientation. Touch ...
Page 70
Making copies 3–12 document centre cs 50 user guide 2 3 4 5 6 7 3 9 touch the image quality tab and touch the original type icon to display the original type screen, figure 17. Touch an option for original type if a setting other than the default (photo & text) is desired. Touch the save button to r...
Page 71
Document centre cs 50 user guide 3–13 making copies 1 2 4 5 6 7 3 13 perform one of the following: • raise the duplex automatic document feeder (dadf) or document glass cover and place the document, face down, on the document glass, as in figure 20. Ensure that the document lies against the reg- ist...
Page 72: Preserving Your Color Output
Making copies 3–14 document centre cs 50 user guide 2 3 4 5 6 7 3 preserving your color output color output, like black and white output, should be handled and stored carefully to preserve its appearance and usability. Your color output, which is made from color dry inks (toners), requires some atte...
Page 73: Basic Copying
Document centre cs 50 user guide 4–1 basic copying 1 2 3 5 6 7 4 4 basic copying overview figure 1: basic copying tab the basic copying tab, illustrated in figure 1, displays frequently used features. Output color the output color feature allows you to select the colors desired for copying. Copy out...
Page 74
Basic copying 4–2 document centre cs 50 user guide 2 3 4 5 6 7 4 reduce/enlarge the reduce/enlarge feature allows you to select the size of the output image from preset values or through independent ratios for the image length and width. The document centre colorseries 50 can also be set up for auto...
Page 75: Output Color
Document centre cs 50 user guide 4–3 basic copying 1 2 3 5 6 7 4 output color the output color feature, figure 2, allows you to select the desired output color. The output color options displayed on the basic copying tab are auto color, full color, 3 pass color, and black. If you select the more... ...
Page 76
Basic copying 4–4 document centre cs 50 user guide 2 3 4 5 6 7 4 auto color the auto color option enables the copier/printer to determine automatically if the document is black and white or color. If the document is black and white, the black option is selected automatically. If the document is colo...
Page 77
Document centre cs 50 user guide 4–5 basic copying 1 2 3 5 6 7 4 full color the full color option combines all four dry ink colors (black, cyan, magenta, and yellow). You should select the full color option when the document contains color and black, as in figure 4. In full color mode, output is pro...
Page 78
Basic copying 4–6 document centre cs 50 user guide 2 3 4 5 6 7 4 black the black option should be selected when the desired output is a black and white copy. Black and white copies can be made from any document. When you select black, the copier/ printer will use black dry ink (toner) only, as in fi...
Page 79
Document centre cs 50 user guide 4–7 basic copying 1 2 3 5 6 7 4 selecting output color on the basic copying tab, select the desired output color option. Selecting a single output color 1 on the basic copying tab, touch the output color more... Option to display the output color screen, as in figure...
Page 80: Copy Output
Basic copying 4–8 document centre cs 50 user guide 2 3 4 5 6 7 4 copy output the copy output feature enables you to select the destination of the output and determine whether it is to be collated or uncollated. For example, three copies of a three-page collated job will result in three sets of copie...
Page 81
Document centre cs 50 user guide 4–9 basic copying 1 2 3 5 6 7 4 if the document centre colorseries 50 has a sorter/mailbox, output may be directed to the sorter/mailbox bins or offset catch tray. The same options are available if your copier/printer has a finisher/mailbox. Use the following procedu...
Page 82: Reduce/enlarge
Basic copying 4–10 document centre cs 50 user guide 2 3 4 5 6 7 4 reduce/enlarge the reduce/enlarge feature allows you to copy the image at different magnifications. You can select one of the following options on the basic copying tab, as illustrated in figure 12. Percentage options depending on wha...
Page 83
Document centre cs 50 user guide 4–11 basic copying 1 2 3 5 6 7 4 auto% the auto% option automatically reduces or enlarges the copy, based on the size and orientation of the document and the paper supply selected. This option is applied only to standard size documents. Key point: select auto% when t...
Page 84
Basic copying 4–12 document centre cs 50 user guide 2 3 4 5 6 7 4 advanced options for reduce/enlarge touching the reduce/enlarge more... Button on the basic copying tab enables you to set reduction or enlargement according to the following options illustrated in figure 15: • preset % • variable % •...
Page 85
Document centre cs 50 user guide 4–13 basic copying 1 2 3 5 6 7 4 preset % when you select the preset% option, the percentages that display on the basic copying tab are supplemented by additional preset percentages. The selected percentage displays in the value box on the reduce/enlarge screen. Sele...
Page 86
Basic copying 4–14 document centre cs 50 user guide 2 3 4 5 6 7 4 variable % select the variable% option to enter the desired percentage for reduce/enlarge. Use either the up and down arrows or the number buttons that display on the touch screen. Copies may be reduced to 25% or enlarged to 400% (fig...
Page 87
Document centre cs 50 user guide 4–15 basic copying 1 2 3 5 6 7 4 1 under reduce/enlarge on the basic copying tab, touch the more... Button. 2 on the reduce/enlarge screen, select the variable% option, as in figure 18. 3 perform one of the following: • touch the up arrow to increase the percentage v...
Page 88
Basic copying 4–16 document centre cs 50 user guide 2 3 4 5 6 7 4 independent x - y % select the independent x - y% option to copy the image at different, independent magnifications from 25% to 400% for the x and y directions. For example, you can enlarge the image to 129% in the x direction and red...
Page 89
Document centre cs 50 user guide 4–17 basic copying 1 2 3 5 6 7 4 independent x - y %: variable % the variable% option enables you to select different percentages for reduction and enlargement in either the x or y direction by using touch screen arrows. You can also indicate the orientation of the o...
Page 90
Basic copying 4–18 document centre cs 50 user guide 2 3 4 5 6 7 4 independent x - y %: auto % the auto% option enables the copier/printer to calculate the reduction and enlargement automatically based on the original document size and on the output paper size. Key point: this option is applied only ...
Page 91: Paper Supply
Document centre cs 50 user guide 4–19 basic copying 1 2 3 5 6 7 4 paper supply the paper supply option enables you to select output paper size and type. The basic copying tab displays the auto paper selection option. This option enables the copier/ printer to automatically detect the original docume...
Page 92
Basic copying 4–20 document centre cs 50 user guide 2 3 4 5 6 7 4 auto tray switching - tools mode the auto tray switching feature enables the copier/printer to switch to another paper supply when a tray runs out of paper. Auto tray switching is activated when auto paper supply is selected and your ...
Page 93
Document centre cs 50 user guide 4–21 basic copying 1 2 3 5 6 7 4 selecting the paper supply 1 on the basic copying tab, review the displayed paper trays under paper supply to see if the desired paper size and type is displayed. 2 perform one of the following: • touch the auto paper option. The copi...
Page 94
Basic copying 4–22 document centre cs 50 user guide 2 3 4 5 6 7 4 programming the paper supply for tray 5 you must select the paper size and paper type when loading paper into tray 5 unless auto paper is selected. 1 on the basic copying tab under paper supply, touch the more... Button to display the...
Page 95
Document centre cs 50 user guide 4–23 basic copying 1 2 3 5 6 7 4 3 perform one of the following to select paper size: • touch auto paper size as shown in figure 27. • touch international sizes and select one of the preset international sizes, such as a3 or a4, as shown in figure 28. Key point: you ...
Page 96
Basic copying 4–24 document centre cs 50 user guide 2 3 4 5 6 7 4.
Page 97: Added Features
Document centre cs 50 user guide 5–1 added features 1 2 3 4 6 7 5 5 added features overview figure 1: added features tab use the added features tab (figure 1) to select options for the features described below. 2 sided copying the 2 sided copying feature specifies 1 to 1, 1 to 2, 2 to 2, and 2 to 1 ...
Page 98
Added features 5–2 document centre cs 50 user guide 2 3 4 5 6 7 5 margin shift the margin shift feature enables you to center a document image, shift the image to one edge slightly, or move the image to a specified edge of the output copy. Note: the auto center feature is included in the margin shif...
Page 99
Document centre cs 50 user guide 5–3 added features 1 2 3 4 6 7 5 mixed size originals when using the duplex automatic document feeder (dadf), you can copy jobs with mixed size originals. When the mixed size originals feature and auto paper tray are selected, the copier/printer automatically identif...
Page 100: 2 Sided Copying
Added features 5–4 document centre cs 50 user guide 2 3 4 5 6 7 5 2 sided copying use the 2 sided copying feature on the added features tab to select 1-sided or 2-sided copy, with options for 2-sided output. Key point: the 2 sided copying feature is available for output of 16 lb. Through 28 lb. (64 ...
Page 101
Document centre cs 50 user guide 5–5 added features 1 2 3 4 6 7 5 • 2 to 2 sided button for 2-sided copies from 2- sided input. Select the side 2 rotate button to display the side 2 rotate screen, illustrated in figure 5. Touch the appropriate description for input documents and desired output: – se...
Page 102
Added features 5–6 document centre cs 50 user guide 2 3 4 5 6 7 5 manual 2 sided copying to create 2-sided copy for output stock that varies from the requirements for the automatic 2 sided copying feature, you must perform a manual feed from paper tray 5. If making 2-sided copies using tray 5, remov...
Page 103: Book Copying
Document centre cs 50 user guide 5–7 added features 1 2 3 4 6 7 5 book copying the book copying feature (figure 7) enables you to copy bound documents such as books, magazines or journals, notebooks, glued forms, or stapled sets. When this feature is selected, each page is copied onto a separate she...
Page 104
Added features 5–8 document centre cs 50 user guide 2 3 4 5 6 7 5 note: keep the following notes in mind when using book copying: • select the auto% option of the reduce/ enlarge feature on the basic copying tab to enlarge the pages of a book so they fit onto the selected long edge paper. • do not u...
Page 105
Document centre cs 50 user guide 5–9 added features 1 2 3 4 6 7 5 book copying off the book copying off option indicates no special scanning is required. It is the default setting. 1 touch the book copying button on the added features tab to display the book copying screen. 2 touch the book copying ...
Page 106
Added features 5–10 document centre cs 50 user guide 2 3 4 5 6 7 5 normal book copying use the normal book copying option to copy the pages of a left-bound book in the order 1 to n (the last page copied). When you select the normal book copying option, the copier/printer scans and copies the left pa...
Page 107
Document centre cs 50 user guide 5–11 added features 1 2 3 4 6 7 5 4 if necessary, use the arrows under the binding erase icon to delete the center shadow from the output. Touch the right arrow to increase the amount of erasure in the center of the output copy. Touch the left arrow to decrease the a...
Page 108
Added features 5–12 document centre cs 50 user guide 2 3 4 5 6 7 5 right to left format use this option to copy the pages of a right-bound book in the order 1 to n (the last page copied). When you select the right to left format button, the copier/printer scans and copies the right page of a bound d...
Page 109
Document centre cs 50 user guide 5–13 added features 1 2 3 4 6 7 5 4 if necessary, use the arrows under the binding erase icon to delete the center shadow from the output. Touch the right arrow to increase the amount of erasure in the center of the output copy. Touch the left arrow to decrease the a...
Page 110
Added features 5–14 document centre cs 50 user guide 2 3 4 5 6 7 5 calendar format use the calendar format option when the document is bound at the top, as a wall calendar. When you select the calendar format button, the copier/printer scans and copies the top page of a bound document, then scans an...
Page 111
Document centre cs 50 user guide 5–15 added features 1 2 3 4 6 7 5 3 perform one of the following: • to scan and copy both pages, touch the both pages button. • to scan and copy the top page without the bottom page, touch the top page only button. • to scan and copy the bottom page without the top p...
Page 112: Margin Shift
Added features 5–16 document centre cs 50 user guide 2 3 4 5 6 7 5 margin shift the margin shift feature (figure 14) allows you to change the placement of an image on the output page. You can move images to the center of a page or move them to a specific corner or edge. In addition, you can specify ...
Page 113
Document centre cs 50 user guide 5–17 added features 1 2 3 4 6 7 5 no shift if no shift is selected, the copier/printer assumes that the original document is registered in the upper left corner of the document glass. If the document is offset from this registration point, the image on the output cop...
Page 114
Added features 5–18 document centre cs 50 user guide 2 3 4 5 6 7 5 auto center selecting the auto center option centers the original image on the output page, as illustrated in figure 18. Key point: the auto center option is not available for 12 x 18 inch or sra3 originals that are being copied with...
Page 115
Document centre cs 50 user guide 5–19 added features 1 2 3 4 6 7 5 1 touch the margin shift button on the added features tab to display the margin shift screen, as illustrated in figure 19. 2 touch either the side 1 or side 2 button to display the margin shift screen for the desired side. 3 touch th...
Page 116
Added features 5–20 document centre cs 50 user guide 2 3 4 5 6 7 5 corner shift select the corner shift feature to move the image to a specified edge or corner on the output copy for side 1 or 2, as illustrated in figure 21. This feature works in three ways: • to shift an image on small documents to...
Page 117
Document centre cs 50 user guide 5–21 added features 1 2 3 4 6 7 5 1 touch the margin shift button on the added features tab to display the margin shift screen as illustrated in figure 22. 2 touch either the side 1 or side 2 button to display the margin shift screen for the desired side. 3 touch the...
Page 118
Added features 5–22 document centre cs 50 user guide 2 3 4 5 6 7 5 variable shift the variable shift option enables you to adjust the horizontal or vertical orientation of the output image, as illustrated in figure 24. You can shift the image up, down, right, or left by means of the variable arrow b...
Page 119
Document centre cs 50 user guide 5–23 added features 1 2 3 4 6 7 5 1 touch the margin shift button on the added features tab to display the margin shift screen, as illustrated in figure 25. 2 touch either the side 1 or side 2 button to display the margin shift screen for the desired side. 3 touch th...
Page 120
Added features 5–24 document centre cs 50 user guide 2 3 4 5 6 7 5 5 touch save to return to the margin shift screen. 6 if desired, repeat steps 2-5 for the other side. 7 touch the button next to the icon that most closely resembles the original orientation for the document on the document glass. 8 ...
Page 121: Edge Erase
Document centre cs 50 user guide 5–25 added features 1 2 3 4 6 7 5 edge erase the edge erase feature (figure 27) enables you to eliminate unwanted marks near the edges of the original from the output copy. The document centre colorseries 50 is set up with a factory default of 2 mm for the edge erase...
Page 122
Added features 5–26 document centre cs 50 user guide 2 3 4 5 6 7 5 no erase the edge erase default setting is no erase. When the no erase button is selected, output will reflect the factory default edge erase of 2 mm or the default edge erase set by your system administrator. A 2mm edge erase is nor...
Page 123
Document centre cs 50 user guide 5–27 added features 1 2 3 4 6 7 5 variable erase for edges the variable erase option, illustrated in figure 29, enables the copier/printer to vary the amount of erasure from 0 to 50 mm in 1 mm increments. The same amount of erasure is applied to both top and bottom e...
Page 124
Added features 5–28 document centre cs 50 user guide 2 3 4 5 6 7 5 1 touch the edge erase button on the added features tab to display the edge erase screen. 2 touch the variable erase button to display the variable erase screen, as illustrated in figure 30. 3 perform one of the following: • under th...
Page 125: Original Size
Document centre cs 50 user guide 5–29 added features 1 2 3 4 6 7 5 original size use the original size feature (figure 31) to specify the original document size as one of a number of standard international or us sizes. You can also manually specify the dimensions of non- standard input or you can se...
Page 126
Added features 5–30 document centre cs 50 user guide 2 3 4 5 6 7 5 1 at the added features tab, select the original size button to display the original size screen, as illustrated in figure 32. 2 perform one of the following: • touch the auto detect option (default) to have the copier/printer identi...
Page 127: Mixed Size Originals
Document centre cs 50 user guide 5–31 added features 1 2 3 4 6 7 5 mixed size originals when a duplex automatic document feeder (dadf) is present, the mixed size originals feature (figure 33) is displayed on the added features tab and documents of mixed sizes can be placed into the dadf for copying....
Page 128
Added features 5–32 document centre cs 50 user guide 2 3 4 5 6 7 5.
Page 129: Image Quality
Document centre cs 50 user guide 6–1 image quality 1 2 3 4 5 7 6 6 image quality overview figure 1: image quality tab the image quality features, listed on the image quality tab (figure 1), allow you to optimize the output copy quality. You begin your adjustment by indicating the type of original do...
Page 130
Image quality 6–2 document centre cs 50 user guide 2 3 4 5 6 7 6 preset color balance the preset color balance option automatically adjusts image quality settings to produce output with balanced image tones. Lighten/darken the adjustment of lightness or darkness will sometimes improve the output qua...
Page 131: Original Type
Document centre cs 50 user guide 6–3 image quality 1 2 3 4 5 7 6 original type the original type feature (figure 2) enables you to define the kind of original document you wish to copy. The copier/printer automatically makes fine adjustments to optimize the copy sharpness based on document type. The...
Page 132
Image quality 6–4 document centre cs 50 user guide 2 3 4 5 6 7 6 photo & text photo & text is the best document type selection for original documents that contain pictures and printed text (figure 4), as you often see in magazines or professional journals. In the photo & text mode, the copier/printe...
Page 133
Document centre cs 50 user guide 6–5 image quality 1 2 3 4 5 7 6 1 touch the original type button on the image quality tab to display the original type screen. 2 touch the photo & text button to display the photo & text detail screen, figure 5. 3 touch the selection in the photo type column which be...
Page 134
Image quality 6–6 document centre cs 50 user guide 2 3 4 5 6 7 6 text text is the best selection for text documents composed of fine line characters or other high contrast documents with bright, dense colors, as in figure 6. Selecting this option suppresses background color. Examples of text documen...
Page 135
Document centre cs 50 user guide 6–7 image quality 1 2 3 4 5 7 6 photo the photo option is the best selection for photographs or lithographs (figure 8) including paintings that contain a variety of pastel colors. The photo option provides the most accurate color and density copy for continuous tone ...
Page 136
Image quality 6–8 document centre cs 50 user guide 2 3 4 5 6 7 6 3 touch the selection in the photo type column which best describes the original document: • halftone use this option for images created using a fine screen that varies in the darkness and density of dots that make up the image. Exampl...
Page 137
Document centre cs 50 user guide 6–9 image quality 1 2 3 4 5 7 6 graphics & maps use the graphics & maps option to optimize the reproduction of detailed graphics, maps, or map- like originals. Examples include highly technical drawings, histograms, pie charts, or roadmaps (figure 10). With this opti...
Page 138: Preset Color Balance
Image quality 6–10 document centre cs 50 user guide 2 3 4 5 6 7 6 preset color balance the preset color balance feature (figure 12) automatically changes image quality settings to produce balanced image tones described below. The preset color balance feature also lets you enable background suppressi...
Page 139
Document centre cs 50 user guide 6–11 image quality 1 2 3 4 5 7 6 lively the lively option, illustrated in figure 14, uses the highest color saturation to produce rich, vivid output colors. The option increases the color saturation to the most vivid setting and adjusts the lighten/darken setting one...
Page 140
Image quality 6–12 document centre cs 50 user guide 2 3 4 5 6 7 6 bright the bright option, illustrated in figure 15, produces a sharp, clear image on the copy. The bright option decreases the low density settings for yellow, magenta, cyan, and black. It increases the color saturation, adjusts the l...
Page 141
Document centre cs 50 user guide 6–13 image quality 1 2 3 4 5 7 6 warm the warm option, illustrated in figure 16, produces a soft image on the copy by transforming low density colors into light and reddish colors. Use this setting to apply a light pink tone to skin colors and to give a soft tone to ...
Page 142
Image quality 6–14 document centre cs 50 user guide 2 3 4 5 6 7 6 cool the cool option, illustrated in figure 17, produces a strong, clear blue tone on the copy. This setting makes blue color stronger and makes dark, cold colors clearer. The cool option decreases the low, medium, and high density se...
Page 143
Document centre cs 50 user guide 6–15 image quality 1 2 3 4 5 7 6 background suppression background suppression prevents undesired marks or images that are printed on the back of an original from appearing on the output copy (see figure 18). A newspaper is one example of this type of original. The b...
Page 144
Image quality 6–16 document centre cs 50 user guide 2 3 4 5 6 7 6 1 touch the preset color balance button on the image quality tab to display the preset color balance screen, illustrated in figure 19. 2 touch the appropriate button for the desired color balance. 3 touch save to return to the image q...
Page 145: Lighten/darken
Document centre cs 50 user guide 6–17 image quality 1 2 3 4 5 7 6 lighten/darken the lighten/darken feature (figure 20) enables you to adjust the overall lightness or darkness (density) of the output copy. This feature offers an auto contrast option as well as seven lighten/ darken levels. The norma...
Page 146
Image quality 6–18 document centre cs 50 user guide 2 3 4 5 6 7 6 the background suppression option in the preset color balance feature of the image quality tab may also be used to suppress background. Refer to the “preset color balance” section in this chapter for more information. 1 touch the ligh...
Page 147: Color Shift/saturation
Document centre cs 50 user guide 6–19 image quality 1 2 3 4 5 7 6 color shift/saturation the color shift/saturation feature (figure 25) allows you to shift all copy colors toward the adjacent hue as well as to adjust the overall richness of color on the output copy. Color shift color shift is useful...
Page 148
Image quality 6–20 document centre cs 50 user guide 2 3 4 5 6 7 6 saturation the saturation feature allows you to adjust the overall richness of color on the output copy. Saturation is sometimes referred to as chroma. Colors with high saturation are sometimes called vivid colors. The flower illustra...
Page 149
Document centre cs 50 user guide 6–21 image quality 1 2 3 4 5 7 6 1 touch the color shift/saturation button on the image quality tab to display the color shift/ saturation screen, as illustrated in figure 32. 2 touch the button for the desired color shift in the range from coolest to warmest. 3 touc...
Page 150: Sharpness
Image quality 6–22 document centre cs 50 user guide 2 3 4 5 6 7 6 sharpness the sharpness feature (figure 33) allows you to adjust the amount of edge definition on the copies. Five adjustment levels, corresponding roughly to the illustrations on the screen, are available. Note: for optimum sharpness...
Page 151
Document centre cs 50 user guide 6–23 image quality 1 2 3 4 5 7 6 1 touch the sharpness button on the image quality tab to display the sharpness screen, as illustrated in figure 37. 2 using the diamond illustrations as guides, touch the button that best reflects the desired degree of softness or sha...
Page 152: Variable Color Balance
Image quality 6–24 document centre cs 50 user guide 2 3 4 5 6 7 6 variable color balance the variable color balance feature (figure 38) allows you to adjust the balance between colors and the overall amount of color on the output copies. Variable color balance provides you with the maximum range of ...
Page 153
Document centre cs 50 user guide 6–25 image quality 1 2 3 4 5 7 6 1 touch the variable color balance button on the image quality tab to display the color balance screen, as illustrated in figure 42. 2 touch the button for the desired color. 3 select the desired density (low, medium, or high) and per...
Page 154
Image quality 6–26 document centre cs 50 user guide 2 3 4 5 6 7 6.
Page 155: Output Formats
Document centre cs 50 user guide 7–1 output formats 1 2 3 4 5 6 7 7 output formats overview figure 1: output formats tab the output formats tab, illustrated in figure 1, enables you to specify special output formats. Multiple-up the multiple-up feature enables you to copy up to eight images from mul...
Page 156
Output formats 7–2 document centre cs 50 user guide 2 3 4 5 6 7 7 transparency separators the copier/printer can produce transparencies with or without blank separators between them. The transparency separators feature directs the copier/printer to insert the separators. Covers the optional covers f...
Page 157: Multiple-Up
Document centre cs 50 user guide 7–3 output formats 1 2 3 4 5 6 7 multiple-up the multiple-up feature (figure 2) enables you to copy two, four, or eight images from multiple originals onto a single page. Figure 3 provides an example of the 4-up option. Note that each image is centered in its space. ...
Page 158
Output formats 7–4 document centre cs 50 user guide 2 3 4 5 6 7 7 2 pages up if you use the 2 pages up option, you can select one of the following image placements for your output copies: • left-to-right / top-to-bottom • right-to-left / top-to-bottom • top-to-bottom figure 4 illustrates the above i...
Page 159: F E
Document centre cs 50 user guide 7–5 output formats 1 2 3 4 5 6 7 4 pages up and 8 pages up if you use the 4-up or 8-up option, you can select one of the following image placements for your output copies: • horizontally, beginning from the upper left corner • horizontally, beginning from the upper r...
Page 160
Output formats 7–6 document centre cs 50 user guide 2 3 4 5 6 7 7 number of images per page tables 1 and 2 will help you determine whether two, four or eight images can fit on a page without image loss due to differences between the original document and output copy size. Images are centered in the ...
Page 161
Document centre cs 50 user guide 7–7 output formats 1 2 3 4 5 6 7 1 touch the multiple-up button on the output formats tab to display the multiple-up screen (figure 6). 2 touch one of the following buttons to display the appropriate detail screen: • 1 page up (default setting, figure 6) • 2 pages up...
Page 162: Repeat Image
Output formats 7–8 document centre cs 50 user guide 2 3 4 5 6 7 7 repeat image the repeat image feature (figure 9) enables you to copy a single image multiple times onto one page. The repeat image feature offers the following options: single image this is the default setting. It produces only one im...
Page 163
Document centre cs 50 user guide 7–9 output formats 1 2 3 4 5 6 7 note: keep the following notes in mind when using repeat image: • the original document must be placed on the document glass. • the following features cannot be used in conjunction with repeat image: – reduce/enlarge, auto% options – ...
Page 164
Output formats 7–10 document centre cs 50 user guide 2 3 4 5 6 7 7 1 touch the repeat image button on the output formats tab to display the repeat image screen (figure 11). 2 touch one of the following options to display the appropriate detail screen: • single image (default setting, figure 11) • au...
Page 165: Transparency Separators
Document centre cs 50 user guide 7–11 output formats 1 2 3 4 5 6 7 transparency separators when you select the transparency separators feature (figure 14), the copier/printer automatically inserts a blank sheet of paper between the transparency copies in the output tray. The transparency separator f...
Page 166
Output formats 7–12 document centre cs 50 user guide 2 3 4 5 6 7 7 note: keep the following notes in mind when using transparency separators: • do not interleave paper and transparencies in paper tray 5. Jams may occur. • the paper used as separators must be the same size as the transparencies. • do...
Page 167
Document centre cs 50 user guide 7–13 output formats 1 2 3 4 5 6 7 1 touch the transparency separators button on the output formats tab to display the transparency separators screen (figure 16). 2 touch one of the following options: • no separators (default setting, figure 16) • blank separators (fi...
Page 168: Covers
Output formats 7–14 document centre cs 50 user guide 2 3 4 5 6 7 7 covers the optional covers feature (figure 19) allows you to add covers to your copied sets, using stock drawn from a different tray than your copies. You can have 1-sided or 2-sided front covers or 1- sided or 2-sided front and back...
Page 169
Document centre cs 50 user guide 7–15 output formats 1 2 3 4 5 6 7 note: keep the following notes in mind when using covers: • the repeat image and transparency separators options are not available with the covers feature. • the covers feature is not available on machines without a sorter. • you mus...
Page 170
Output formats 7–16 document centre cs 50 user guide 2 3 4 5 6 7 7 1 touch the covers button on the output formats tab to display the covers screen (figure 20). 2 touch one of the following options: • no cover (default setting, figure 20) touch the no cover button if you do not wish to create a cove...
Page 171
Document centre cs 50 user guide 7–17 output formats 1 2 3 4 5 6 7 • front cover touch the front cover button if you wish to create a front cover. This displays the paper trays button (figure 21). Touch the paper trays button to display the cover stock tray and paper supply tray options (figure 22)....
Page 172: Invert Image
Output formats 7–18 document centre cs 50 user guide 2 3 4 5 6 7 7 invert image the invert image feature (figure 25) allows you to create a mirror image, negative image, or negative mirror image. Note: to apply an invert image feature to a document, you must use the document glass when making your c...
Page 173
Document centre cs 50 user guide 7–19 output formats 1 2 3 4 5 6 7 1 touch the invert image button on the output formats tab to display the invert image screen (figure 27). 2 touch the mirror image button to display the mirror image screen (figure 28). 3 perform one of the following: • touch the nor...
Page 174
Output formats 7–20 document centre cs 50 user guide 2 3 4 5 6 7 7 negative image the negative image feature reverses the colors of the whole document image. This feature has two options: • positive image this produces a copy that looks like the original document (figure 29). This is the default set...
Page 175
Document centre cs 50 user guide 7–21 output formats 1 2 3 4 5 6 7 1 touch the invert image button on the output formats tab to display the invert image screen (figure 31). 2 touch the negative image button to display the negative image screen (figure 32). 3 perform one of the following: • touch the...
Page 176: Poster Mode
Output formats 7–22 document centre cs 50 user guide 2 3 4 5 6 7 7 poster mode the poster mode feature (figure 33) allows you to create a poster size reproduction of the document original by creating multiple images that can be trimmed and joined together after. There will be some image overlap on t...
Page 177
Document centre cs 50 user guide 7–23 output formats 1 2 3 4 5 6 7 note: keep the following notes in mind when using the poster mode feature: • copy quantity selection for the poster feature is limited to one. • an image can be enlarged up to 400 times its normal size. The copier/printer can produce...
Page 178
Output formats 7–24 document centre cs 50 user guide 2 3 4 5 6 7 7 1 touch the poster mode button on the output formats tab to display the poster mode screen (figure 34). 2 touch one of the following options: • no poster touch no poster if you do not wish to create a poster. • variable poster size t...
Page 179
Document centre cs 50 user guide 7–25 output formats 1 2 3 4 5 6 7 • preset poster size touch preset poster size (figure 36) if you wish to create a preset poster size. Touch the appropriate dimension size button for the final poster size. The machine will automatically select auto% reduce/enlarge o...
Page 180
Output formats 7–26 document centre cs 50 user guide 2 3 4 5 6 7 7.
Page 181: Job Assembly
Document centre cs 50 user guide 8–1 job assembly 2 3 4 5 6 7 8 8 job assembly overview figure 1: job assembly tab in the job assembly tab, illustrated in figure 1, you can use the following feature: stored jobs this feature enables you to store frequently-used feature settings in the built-in copie...
Page 182: Stored Jobs
Job assembly 8–2 document centre cs 50 user guide 2 3 4 5 6 7 8 stored jobs the stored jobs feature (figure 2) is used to store jobs with complex feature settings that you run frequently. This feature allows you to program various settings in the built-in copier/printer memory and save them as a sin...
Page 183
Document centre cs 50 user guide 8–3 job assembly 2 3 4 5 6 7 8 store a job 1 program the features and options you want to save for future use. 2 touch the stored jobs button on the job assembly tab to display the stored jobs screen, as illustrated in figure 3. 3 touch the store job option. 4 touch ...
Page 184
Job assembly 8–4 document centre cs 50 user guide 2 3 4 5 6 7 8 retrieve a job 1 touch the stored jobs button on the job assembly tab to display the stored jobs screen, as illustrated in figure 4. 2 touch the retrieve job option to display all stored jobs. Only those buttons associated with jobs wil...
Page 185
Document centre cs 50 user guide 8–5 job assembly 2 3 4 5 6 7 8 delete a job 1 touch the stored jobs button on the job assembly tab to display the stored jobs screen. 2 touch the delete option to display all stored jobs, as illustrated in figure 5. Only those buttons associated with jobs will be sel...
Page 186
Job assembly 8–6 document centre cs 50 user guide 2 3 4 5 6 7 8.
Page 187: Paper
Document centre cs 50 user guide 9–1 paper 1 3 4 5 6 7 9 9 paper overview this chapter contains basic information about loading paper or transparencies and about using paper trays. It also includes some paper usage guidelines for the document centre colorseries 50. Good quality, 24 lb (90 gsm) brigh...
Page 188
Paper 9–2 document centre cs 50 user guide 2 3 4 5 6 7 9 paper trays 1, 2, 3, and 4 paper trays 1, 2, 3, and 4 hold the paper supply for the document centre colorseries 50 color copier/printer. Paper tray 1, illustrated in figure 1, can accommodate 8.5 x 11 inch, a4, b5, or a5 paper. Paper trays 2, ...
Page 189
Document centre cs 50 user guide 9–3 paper 1 3 4 5 6 7 9 paper tray 5 paper tray 5 (sometimes called the bypass tray or the multiple sheet inserter) is located on the left side of the copier/printer, as illustrated in figure 2. Paper tray 5 can accommodate transparencies and other specified paper st...
Page 190
Paper 9–4 document centre cs 50 user guide 2 3 4 5 6 7 9 auto tray switching - tools mode auto tray switching is enabled in the tools mode only for paper trays 1, 2, 3 and 4, not for paper tray 5. The auto tray switching feature prompts the copier/printer to switch trays when one runs out of paper. ...
Page 191: Loading Stock
Document centre cs 50 user guide 9–5 paper 1 3 4 5 6 7 9 loading stock using paper the front and back surfaces of a piece of paper differ slightly. Therefore, one side is preferred as the side to image when copying to one side only, or the side to image first if copying to two sides. This side is re...
Page 192
Paper 9–6 document centre cs 50 user guide 2 3 4 5 6 7 9 key point: • for the best results, use only the recommended paper sizes, paper weights, or paper types. If you do not use recommended papers, you may experience copy quality problems, paper jams, or possible component failures. Refer to the re...
Page 193
Document centre cs 50 user guide 9–7 paper 1 3 4 5 6 7 9 using transparencies transparencies can be run only from tray 5. Transparencies with removable lead edge paper stripes are recommended. Key point: use only the transparencies recommended in the recommended materials list and the color material...
Page 194
Paper 9–8 document centre cs 50 user guide 2 3 4 5 6 7 9 loading paper into trays 1, 2, 3, and 4 1 to load a paper tray, pull the tray out fully, as illustrated in figure 5. 2 select the appropriate paper to load. If you are not sure of the size to load, refer to the paper supply feature on the basi...
Page 195
Document centre cs 50 user guide 9–9 paper 1 3 4 5 6 7 9 4 in paper trays 2, 3, and 4, straighten the paper stack and adjust the paper guides until they lightly touch the paper. See figures 7 and 8. 5 close the paper tray slowly to avoid shifting the paper stack. This ensures that the paper is in th...
Page 196
Paper 9–10 document centre cs 50 user guide 2 3 4 5 6 7 9 loading stock into paper tray 5 the number of sheets that can be loaded in paper tray 5 (sheet capacity) varies with the weight of the stock. For more information about paper weight and requirements, refer to the recommended materials list an...
Page 197
Document centre cs 50 user guide 9–11 paper 1 3 4 5 6 7 9 1 open paper tray 5 by grasping the cover tray 5 at the top in the middle and gently pushing it away from the copier/printer and down, as illustrated in figure 10. For long paper, extend the tray by grasping the long plastic tab at the left e...
Page 198
Paper 9–12 document centre cs 50 user guide 2 3 4 5 6 7 9 2 place the stack of materials onto paper tray 5 between the edge guides, as illustrated in figure 13. Slide the stack into the tray until it stops. 3 move the back edge guide until it lightly touches the side of the stack of materials. Readj...
Page 199
Document centre cs 50 user guide 9–13 paper 1 3 4 5 6 7 9 using 12 x 18 inch or sra3 paper use paper tray 5 for 12 x 18 inch (305 x 457 mm) or sra3 (320 x 450 mm) paper. Refer to the recommended materials list and the color materials usage guide for more information about the paper you are loading. ...
Page 200
Paper 9–14 document centre cs 50 user guide 2 3 4 5 6 7 9 3 load up to 100 sheets of 12 x 18 inch (305 x 457 mm) or sra3 (320 x 457 mm) 20 lb. Paper into paper tray 5. (remember that images are copied onto the upper side of the paper.) 4 adjust the back edge guide until it lightly touches the paper....
Page 201: Paper Usage
Document centre cs 50 user guide 9–15 paper 1 3 4 5 6 7 9 paper usage this section provides a quick summary of useful information about paper for the document centre colorseries 50 copier/printer. For additional general information, refer to the color materials usage guide. For additional specific i...
Page 202
Paper 9–16 document centre cs 50 user guide 2 3 4 5 6 7 9 paper excellent good not recommended size • 7.2 x 7.2 to 11 x 17 inches • a4 to a3 • 12 x 18 inches • 4 x 6 inch postcard • sra3 • a6 • smaller than 7.2 x 7.2 inches • larger than 12 x 18 inches or sra3 (320 x 450 mm) • any sizes between 11 x...
Page 203
Document centre cs 50 user guide 9–17 paper 1 3 4 5 6 7 9 * in general, color paper is recommended for black only. Paper type • xerox color xpressions or xerox europe colotech + paper • xerox 4024 dp or xerox europe premier for black only • xerox or xerox europe rec- ommended transparencies - long e...
Page 204
Paper 9–18 document centre cs 50 user guide 2 3 4 5 6 7 9.
Page 205: Overview
Document centre cs 50 user guide 10–1 duplex automatic document feeder 1 10 4 5 6 7 10 duplex automatic document feeder overview this chapter describes the duplex automatic document feeder (dadf), illustrated in figure 1, for the document centre colorseries 50 copier/printer. The dadf automatically ...
Page 206
Duplex automatic document feeder 10–2 document centre cs 50 user guide 2 3 4 5 6 7 10 key point: • the copier/printer automatically copies black and white documents in the black mode and documents with color in the full color mode when auto output color is selected. • if the dadf belt is dirty and t...
Page 207
Document centre cs 50 user guide 10–3 duplex automatic document feeder 1 3 4 5 6 7 10 if you use the dadf to input the original documents, the output will be delivered in one of the following ways, assuming a three-page job. • in a basic, single-copy job, output is delivered face down in 1, 2, 3 ord...
Page 208: Document Path
Duplex automatic document feeder 10–4 document centre cs 50 user guide 2 3 4 5 6 7 10 component names and functions the following items are the principal components of the duplex automatic document feeder, as illustrated in figure 2: 1 document feed lamp this lamp displays a green arrow when a docum...
Page 209: Document Specifications
Document centre cs 50 user guide 10–5 duplex automatic document feeder 1 3 4 5 6 7 10 document specifications always use the recommended types of input documents so that the duplex automatic document feeder operates within the design specifications. Document jams may occur if non- standard documents...
Page 210
Duplex automatic document feeder 10–6 document centre cs 50 user guide 2 3 4 5 6 7 10 if the dadf senses non-standard size documents in the feeder, a message displays and the copier/ printer stops. Place such non-standard documents on the document glass, or enter the document size by using the origi...
Page 211
Document centre cs 50 user guide 10–7 duplex automatic document feeder 1 3 4 5 6 7 10 documents not recommended the following document types cause document jams or malfunction of the copier/printer. Make copies of these documents by placing them directly onto the document glass. • book, pamphlet, an...
Page 212: Loading The Documents
Duplex automatic document feeder 10–8 document centre cs 50 user guide 2 3 4 5 6 7 10 loading the documents you can load up to 50 documents from 16 lb. (64 gsm) to 32 lb. (128 gsm) into the dadf. 1 remove any paper clips or staples from the documents. Align the documents. 2 place the documents face ...
Page 213
Document centre cs 50 user guide 10–9 duplex automatic document feeder 1 3 4 5 6 7 10 4 extend the dadf output tray to accommodate the size of the documents, as illustrated in figure 5. 5 press the start button. The documents automatically feed one by one, onto the document glass. The feeding begins...
Page 214: Clearing A Document Jam
Duplex automatic document feeder 10–10 document centre cs 50 user guide 2 3 4 5 6 7 10 clearing a document jam when a document jam occurs in the duplex automatic document feeder, the document feed lamp (figure 6) lights and instructions for clearing the jam appear on the screen display. 1 open the l...
Page 215
Document centre cs 50 user guide 10–11 duplex automatic document feeder 1 3 4 5 6 7 10 3 close the document chute and lower the left cover. 4 slide the document guide away from the stack of documents, as illustrated in figure 8. Remove the documents from the document feeder tray. 5 raise the dadf an...
Page 216
Duplex automatic document feeder 10–12 document centre cs 50 user guide 2 3 4 5 6 7 10 8 check the documents for damage, creases, and/ or folds before reloading them into the document feeder tray. A torn, creased, or folded document can cause a document jam. Key point: if a document is damaged, you ...
Page 217: 11 Sorter/mailbox
Document centre cs 50 user guide 11–1 sorter/mailbox 1 4 5 6 7 11 11 sorter/mailbox overview the document centre colorseries 50 copier/ printer may be equipped with an optional sorter/ mailbox, as illustrated in figure 1. The sorter/ mailbox contains the following components: 1 sorter/mailbox releas...
Page 218
Sorter/mailbox 11–2 document centre cs 50 user guide 2 3 4 5 6 7 11 warning: do not place your fingers between the bins while the sorter/mailbox is in operation. Warning: never cheat the safety interlock switch. Injury or a document jam may occur. The safety interlock switch shuts off the sorter/ ma...
Page 219: Using The Sorter/mailbox
Document centre cs 50 user guide 11–3 sorter/mailbox 1 3 4 5 6 7 11 using the sorter/mailbox the optional sorter/mailbox performs like a sorter or mailbox for the document centre colorseries 50 copier/printer configuration. Contact your xerox representative to change functionality. When you use the ...
Page 220
Sorter/mailbox 11–4 document centre cs 50 user guide 2 3 4 5 6 7 11 each sorter/mailbox bin can hold up to 100 copies of 20 lb (75 gsm) paper. The sorter/mailbox can accept paper sizes from 8.5 x 11 inches (a4) to 11 x 17 inches (a3). If you copy onto transparencies using paper tray 5, the copies an...
Page 221: Clearing A Paper Jam
Document centre cs 50 user guide 11–5 sorter/mailbox 1 3 4 5 6 7 11 clearing a paper jam when a paper jam occurs, a paper jam message and instructions for clearing the paper jam display on the screen. Key point: remove the jammed paper carefully and gradually so you do not tear it. If the jammed pap...
Page 222
Sorter/mailbox 11–6 document centre cs 50 user guide 2 3 4 5 6 7 11 3 if the jam is behind the left front door of the sorter/mailbox: 1. Open the left front door (figure 4). 2. Push the green handle (5) down, as illustrated in figure 4, to release the baffle. Rotate the knob (6) to release any jamme...
Page 223
Document centre cs 50 user guide 11–7 sorter/mailbox 1 3 4 5 6 7 11 4 if the jam is behind the right front door of the sorter/mailbox: 1. Open the right front door. 2. Push the upper handle (8) to the left to open the transport area (figure 5). Remove any jammed paper. 3. Push the handle to the righ...
Page 224
Sorter/mailbox 11–8 document centre cs 50 user guide 2 3 4 5 6 7 11.
Page 225: 12 Accessories
Document centre cs 50 user guide 12–1 accessories 1 4 5 6 7 12 12 accessories overview this chapter will provide you with an introduction to the different accessories that accompany your document centre colorseries 50. These accessories include the optional high capacity feeder and the standard conv...
Page 226
Accessories 12–2 document centre cs 50 user guide 2 3 4 5 6 7 12 high capacity feeder the high capacity feeder enables you to load a large quantity of paper into your printer. It connects to the left side of the printer (figure 2). Although labeled tray 6, the high capacity feeder is referred to as ...
Page 227: High Capacity Feeder
Document centre cs 50 user guide 12–3 accessories 1 3 4 5 6 7 12 high capacity feeder the hcf can be attached to and used with your document centre colorseries 50 copier/printer. Acceptable media the hcf can feed paper from 16 lb. (64 gsm) – 28 lb. (105 gsm). It can hold a maximum of 2000 sheets of ...
Page 228
Accessories 12–4 document centre cs 50 user guide 2 3 4 5 6 7 12 2 if you are changing paper sizes, perform the following: a. Remove all paper in the tray. Caution: handle the paper and the paper guide carefully so you do not break the black plastic sensor actuators on the guide. B. Remove the metal...
Page 229
Document centre cs 50 user guide 12–5 accessories 1 3 4 5 6 7 12 clearing an hcf paper jam 1 follow the touch screen messages in order to clear the jam. 2 slide the hcf away from the printer (figure 6). 3 remove any partially fed paper from the exit area on the hcf and the entry to the copier/printe...
Page 230
Accessories 12–6 document centre cs 50 user guide 2 3 4 5 6 7 12 accessing the hcf from the client workstation from the client workstation, you should add the hcf to the available device options. This procedure must be repeated at each client workstation. Even when the hcf is installed, you should u...
Page 231
Document centre cs 50 user guide 12–7 accessories 1 3 4 5 6 7 12 windows nt note: you may need system administrator privileges to perform the following procedure. 1 from the start menu, select settings, then printers, and the desired printer. 2 from the file menu, select properties. 3 select the dev...
Page 232
Accessories 12–8 document centre cs 50 user guide 2 3 4 5 6 7 12 mac os 1 from the apple menu, select chooser. 2 in the chooser, select adobe ps. 3 in the select ps printer dialog box, highlight the name of the desired printer and select setup. Note: if a .Ppd file has already been associated with t...
Page 233: Convenience Stapler
Document centre cs 50 user guide 12–9 accessories 1 3 4 5 6 7 12 convenience stapler the convenience stapler is a standard accessory provided with your document centre colorseries 50 copier/printer. The convenience stapler unit includes the stapler as well as a holder for used staples and stationary...
Page 234
Accessories 12–10 document centre cs 50 user guide 2 3 4 5 6 7 12 acceptable media the convenience stapler can staple up to 50 sheets of paper up to 24 lbs. And 90 gsm. For equivalent paper types and weights, refer to the recommended materials list and the color materials usage guide for this produc...
Page 235
Document centre cs 50 user guide 12–11 accessories 1 3 4 5 6 7 12 using the stapler 1 ensure that you have no more than 50 sheets of 24 lb. Paper. Align all sheets to the edge you want to staple. 2 slide the set under the staple head using the diagonal or straight marks on the stapler base as a guid...
Page 236
Accessories 12–12 document centre cs 50 user guide 2 3 4 5 6 7 12 adding staples 1 open the stapler by grasping the cover at the two indentations on the upper right and left side and pulling it straight up and back (figure 10). 2 pull the empty cartridge out by holding the gold tabs and pulling the ...
Page 237
Document centre cs 50 user guide 12–13 accessories 1 3 4 5 6 7 12 clearing a stapler jam 1 for a simple jam, remove the set with the jammed staples from the stapler. Insert a sheet under the staple head to cause the stapler to eject the jammed staple. 2 if the set itself is jammed, remove the staple...
Page 238
Accessories 12–14 document centre cs 50 user guide 2 3 4 5 6 7 12.
Page 239: 13 Problem Solving
Document centre cs 50 user guide 13–1 problem solving 1 4 5 6 7 13 13 problem solving overview the document centre colorseries 50 copier/ printer is designed to help you find and solve problems as they happen. The copier/printer can detect problems and display the corrective action on the screen, as...
Page 240
Problem solving 13–2 document centre cs 50 user guide 2 3 4 5 6 7 13 1 with the power on and the copier/printer in a fault condition, press the stop button on the control panel. 2 record the following information so that you can provide it to the xerox representative at the support center: • with th...
Page 241: Paper Jam Clearance
Document centre cs 50 user guide 13–3 problem solving 1 3 4 5 6 7 13 paper jam clearance paper may jam in several areas inside the copier/ printer: • behind the left door • behind the right door • behind the front door • in the duplex path • in the output area, that is, near the output tray (or the ...
Page 242
Problem solving 13–4 document centre cs 50 user guide 2 3 4 5 6 7 13 key point: gradually remove the jammed paper so you do not rip it. If the jammed paper rips, be sure to remove all of the pieces. The action required to clear a paper jam varies with the location of the jam. Clearance procedures fo...
Page 243
Document centre cs 50 user guide 13–5 problem solving 1 3 4 5 6 7 13 paper jam behind the left door note: paper that is partially out of the copier/ printer may become more severely jammed if it is not removed before you open the paper path module. Ensure that all paper is cleared from this area, es...
Page 244
Problem solving 13–6 document centre cs 50 user guide 2 3 4 5 6 7 13 paper jam behind the right door 1 when the touch screen displays a message indicating a jam behind the right door, if there is a sorter/mailbox, push down on the release lever, as illustrated in figure 6, and push the sorter/ mailb...
Page 245
Document centre cs 50 user guide 13–7 problem solving 1 3 4 5 6 7 13 paper jam behind the front door 1 when the touch screen displays a message indicating a jam behind the front door, open the front door, as illustrated in figure 8. 2 rotate the green handle clockwise, as illustrated in figure 9, an...
Page 246
Problem solving 13–8 document centre cs 50 user guide 2 3 4 5 6 7 13 4 in the registration area, lift the baffle marked 1 and carefully remove the jammed paper, as illustrated in figure 10. Press the baffle gently back into place. Note: if transparency jams occur in this area, check paper tray 5 to ...
Page 247
Document centre cs 50 user guide 13–9 problem solving 1 3 4 5 6 7 13 if the paper jam is in the fuser exit area, locate the fuser exit area handle at the right of the paper path module, as illustrated in figure 12. Move the handle to the right and carefully remove the jammed paper. Gently secure the...
Page 248
Problem solving 13–10 document centre cs 50 user guide 2 3 4 5 6 7 13 paper jam inside a paper tray paper that is partially out of the paper tray when the paper tray is opened can cause more complex jams by tearing. The torn pieces may become jammed in areas that you cannot reach. 1 use the message ...
Page 249
Document centre cs 50 user guide 13–11 problem solving 1 3 4 5 6 7 13 paper jam inside paper tray 5 1 use the message that displays on the touch screen to locate the paper jam. 2 if necessary, grasp the center top handle and raise the top of paper tray 5 toward the copier/ printer to access the jam,...
Page 250: Resolving Hardware Problems
Problem solving 13–12 document centre cs 50 user guide 2 3 4 5 6 7 13 resolving hardware problems warning: when clearing the paper path in the fuser area (located in the paper path module), remember that the surfaces are hot. To avoid injury, proceed with caution when clearing the path. Problem sugg...
Page 251
Document centre cs 50 user guide 13–13 problem solving 1 3 4 5 6 7 13 resolving programming problems problem suggested solution the control panel touch screen does not respond to a touch command. Press clear all on the control panel. Touch a selectable button on the touch screen with one finger. A s...
Page 252: Resolving Processor Problems
Problem solving 13–14 document centre cs 50 user guide 2 3 4 5 6 7 13 resolving processor problems problem suggested solution transparencies use transparencies with a painted or removable white stripe. Load them with stripe down, as the lead edge of the sheet in paper tray 5. Load the transparencies...
Page 253
Document centre cs 50 user guide 13–15 problem solving 1 3 4 5 6 7 13 problem suggested solution paper jams when exiting the paper trays ensure that the edge guides of the paper tray fit snugly against the paper stack. Do not fill the paper trays above the max fill line indicator. Tray 1 holds appro...
Page 254
Problem solving 13–16 document centre cs 50 user guide 2 3 4 5 6 7 13 excessive paper curl paper curl may be a result of: • the mass of dry ink (toner) coverage on the copy - the greater the toner mass, the greater the paper curl. • the paper weight. • the humidity conditions at the copier/printer. ...
Page 255
Document centre cs 50 user guide 13–17 problem solving 1 3 4 5 6 7 13 resolving output quality problems using the basic copying, added features, or image quality tabs problem suggested solution moiré patterns on the copies this problem sometimes occurs when origi- nal documents have halftone images....
Page 256
Problem solving 13–18 document centre cs 50 user guide 2 3 4 5 6 7 13 scattered, very light show-through images occur when copying a document that is on thin paper. Select the background suppression option in the preset color balance feature in the image quality tab. To eliminate the unwanted show-t...
Page 257
Document centre cs 50 user guide 13–19 problem solving 1 3 4 5 6 7 13 the edge of the original image is deleted from the copies. Edge deletion on all sides of the copy is nor- mal, and is greatest on the lead edge of the copy. Set the edge erase feature, variable erase option, to 4 mm to minimize th...
Page 258
Problem solving 13–20 document centre cs 50 user guide 2 3 4 5 6 7 13 background on the copies. Examine the input document for the source of the problem. Ensure that the document is held flat on the document glass and that the document cover is closed. From the image quality tab, adjust the lighten/...
Page 259
Document centre cs 50 user guide 13–21 problem solving 1 3 4 5 6 7 13 the image quality gradually degrades on successive copies, or copies made with set- tings used previously are significantly worse than copies you are making now. The internal process control function of the copier/printer has degr...
Page 260
Problem solving 13–22 document centre cs 50 user guide 2 3 4 5 6 7 13 the image quality and the color have degraded over a period of time. The dry ink cartridge may need attention. Refer to the copier/printer administrator. Large black borders appear on the copies with documents smaller than the cop...
Page 261
Document centre cs 50 user guide 13–23 problem solving 1 3 4 5 6 7 13 original type selection and output when you use the original type options of photo & text or text, the copier/printer attempts to discriminate between text and photo or picture areas within the original. The copier/printer then ap...
Page 262
Problem solving 13–24 document centre cs 50 user guide 2 3 4 5 6 7 13.
Page 263: 14 Technical Information
Document centre cs 50 user guide 14–1 technical information 1 4 5 6 7 14 14 technical information overview the information in this chapter is provided for your convenience and can be supplemented with information provided by your xerox sales or service representative..
Page 264: Specifications
Technical information 14–2 document centre cs 50 user guide 2 3 4 5 6 7 14 specifications electrical power requirements (115 vac - 60 hz) specifications single phase two wire plus earth ground current service 20 amps (dedicated line recom- mended but not required) line-to-neutral 115 volts (+10%) fr...
Page 265
Document centre cs 50 user guide 14–3 technical information 1 3 4 5 6 7 14 electrical power requirements (220-240 vac - 50 hz) specifications single phase two wire plus earth ground current service 15 amps (dedicated line recom- mended but not required) line-to-neutral 220 - 240 volts (+10%) frequen...
Page 266
Technical information 14–4 document centre cs 50 user guide 2 3 4 5 6 7 14 environmental requirements health and safety information standby temperatures minimum 14 o f (-10 o c) at 5% relative humidity maximum 104 o f (40 o c) at 95% relative humid- ity operating temperatures minimum 50 o f (10 o c)...
Page 267
Document centre cs 50 user guide 14–5 technical information 1 3 4 5 6 7 14 capabilities * from document glass to the output catch tray, the black and white output rate is 50 copies per minute.With a dadf, the black and white output rate is 40 copies per minute. Warm-up time 7.4 — 9.5 minutes at 72 o...
Page 268
Technical information 14–6 document centre cs 50 user guide 2 3 4 5 6 7 14 physical dimensions note: the dimensions listed include the processor and the standard catch tray. Floor space requirements can vary depending on copier/printer options and placement location. Contact your xerox sales or serv...
Page 269
Document centre cs 50 user guide 14–7 technical information 1 3 4 5 6 7 14 system modes of operation running mode to ready mode when running mode is complete. Ready mode to lower power mode as set by system administrator: 1-240 minutes factory default: 15 minutes low power mode to sleep mode as set ...
Page 270
Technical information 14–8 document centre cs 50 user guide 2 3 4 5 6 7 14 copy rates for paper trays 1, 2, 3, and 4: normal paper copies per minute for normal paper (64—105 gsm) fed from trays 1, 2, 3, and 4 are listed below. These rates assume black and white copies are being made from the documen...
Page 271
Document centre cs 50 user guide 14–9 technical information 1 3 4 5 6 7 14 copy rates for paper trays 2, 3, and 4: limited heavyweight paper copies per minute for limited heavyweight paper (106—128 gsm) fed from trays 2, 3, and 4 are listed below. Black / white mode color mode simplex simplex b5 lef...
Page 272
Technical information 14–10 document centre cs 50 user guide 2 3 4 5 6 7 14 copy rates for tray 5 copy rates (copies per minute) for tray 5 are listed below. Size black / white mode color mode simplex simplex normal paper 64—105 gsm a4 / letter lef 25 6 a3 20 6 ohp (transparency) a4 / letter lef 25 ...
Page 273: (Dadf Specifications)
Document centre cs 50 user guide 14–11 technical information 1 3 4 5 6 7 14 duplex automatic document feeder (dadf specifications) document feeding method face-up, 1-to-50 (top feed) method. Capable of auto- matic document feeding. Applicable document sizes minimum: 8.5 x 11 inches (216 x 279 mm) sh...
Page 274
Technical information 14–12 document centre cs 50 user guide 2 3 4 5 6 7 14 sorter/mailbox specifications paper size 8.5 x 11 inches to 11 x 17 inches (216 x 279 mm to 279 x 432 mm) (a4 to a3) capacity of the output/offset catch tray 500 sheets of 20 lb. (75 gsm) paper number of sorter/mailbox bins ...
Page 275
Document centre cs 50 user guide 14–13 technical information 1 3 4 5 6 7 14 finisher/mailbox specifications note: for more information regarding finisher/ mailbox specifications and capabilities, refer to the docucolor 12/document centre colorseries 50 in-line stapler finisher user guide. Paper size...
Page 276: Metric Conversion Chart
Technical information 14–14 document centre cs 50 user guide 2 3 4 5 6 7 14 metric conversion chart * note that most numbers are rounded off. Inches millimeters (mm) inches millimeters (mm) inches/ international sizes millimeters (mm) celsius (°c) fahrenheit (°f) 0.01 0.254 6 153 13.5 343 10 50 0.04...
Page 277: 15. Index
Document centre cs 50 user guide 15-1 index 14 15 numerics 2 sided copying: 5-4 2-up: 7-4 3 pass color: 4-5 4 pages up: 7-5 8 pages up: 7-5 a access button: 2-3 access number: 2-3 accessories: 2-15 added features tab: 5-1–5-31, 12-1–?? Book copying: 5-7 edge erase: 5-25 margin shift: 5-16 original s...
Page 278
Index 15-2 document centre cs 50 user guide 15 control panel stop: 2-5 cool (color balance): 6-14 copy output: 4-8 copy quantity: 2-7 copy rates paper tray 5: 14-10 paper trays 1, 2, 3, 4 (general paper): 14-8 paper trays 2, 3, 4 (heavy paper): 14-9 corner shift: 5-20 problem solving: 13-21 covers: ...
Page 279
Document centre cs 50 user guide 15-3 index 15 invert image: 7-18–7-19 negative image: 7-20 positive image: 7-20 j jam dadf: 10-4 using clear: 2-6 using clear all: 2-5 jam clearance see paper jam clearance: 13-3, 13-4 jam clearance behind front door (copier/printer): 13-7 behind left door (copier/pr...
Page 280
Index 15-4 document centre cs 50 user guide 15 image degradation: 13-21 image density uneven: 13-22 light output: 13-19 low contrast: 13-19 missed pages: 13-17 moiré patterns: 13-17 secondary operations: 13-22 output tray paper path: 2-18 p paper: 9-1–9-17 auto tray switching: 9-4 excessive paper cu...
Page 281
Document centre cs 50 user guide 15-5 index 15 cannot complete programming: 13-13 control panel touch screen: 13-13 features not selectable: 13-13 information screen: 13-13 timeout: 13-13 pvc and copies: 3-14 q quick copy: 3-5–3-6 r reduce/enlarge: 4-10–4-18 auto%: 4-11, 4-18 independent x-y: 4-14, ...
Page 282
Index 15-6 document centre cs 50 user guide 15 u uncollated output (sorter/mailbox): 11-3 v variable color balance: 6-24 variable edge erase: 5-27 variable image repeat: 7-8 variable shift: 5-22 variable%: 4-17 variable% (reduce/enlarge): 4-14 w warm (color balance): 6-13 white border edges: 2-15, 2...
Page 284
Prepared by: xerox corporation global knowledge & language services 780 salt road webster, new york 14580 march, 2000 701p34151.