Xerox Document WorkCentre 450c Reference Manual

q

    Check off the box after each Step is completed.

1. 

q

   Remove all paper and the clear plastic Printer

Output Tray in front of the paper tray.  (See Figure 1)

2. 

q

   Insert approximately a ¼ inch thick stack of

20 lb. paper (measure it) into the Paper Tray.

3. 

q

   Insert the Feed Roll Cleaning Pad (provided in

Kit) in front of the paper stack (Long-Edge-Down) with

the green side (coarse side) facing out.

Page 1 of 2

             NOTE:  Good lighting is required in order to

see inside the WorkCentre 450

c 

/ 450

cp

F

ü

CUSTOMER SELF SERVICE

Figure 1.  Inserting the Feed Roll Cleaning Pad

                 into the Paper Tray

Step 1:

Remove all

paper and the

clear plastic

Printer Output

Tray

 Bottom of

Paper Tray

Printer Output

Tray

Step 2:

Insert approximately a ¼

inch thick stack of paper

into the Paper Tray and

insert the Feed Roll

Cleaning Pad in front of the

paper stack with the green

side facing out

 ¼ inch Paper

Stack

 Feed Roll

Cleaning Pad

with the green

side facing out

 3 Feed Rolls are in

front of the Pad

(continued)

Xerox - 

DOCUMENT

WorkCentre

 450

c

 / 450

cp

Feed Roll Cleaning Kit

The purpose of the instructions is to provide a step by step procedure to correct a paper feed problem.  Read all

the instructions before performing this procedure.

CUSTOMER PREPARATION:

•

Unpack the repair kit and read the Repair Instructions.

 Contents of kit: 

•   Feed Roll CleaningPad

•   Repair Instructions

DRB-FILE

709P00850 Rev A

March 2000