Xerox DocuPrint C2255 Quick Referenc Manual - 1 Through 4

 Loading Paper 

47

Paper Sizes/Paper Types for Trays 1 

through 4

Though the printer can detect the size and 

orientation of paper loaded in paper trays 1 

through 4, use the control panel to configure the 

size setting after loading custom size paper. 

Paper type also cannot be detected and so the 

paper type setting also must be configured. If the 

paper type setting does not match the actual type 

of the paper, toner may not fuse properly to the 

paper, resulting in poor print quality. Make sure to 

configure the paper type settings correctly. The 

initial factory default setting for all the trays is plain 

paper. 

Refer to

• “Setting the Paper Sizes of Trays 1 through 4” (P. 47)

• “Changing the Paper Type Settings of Trays 1 through 

4” (P. 48)

Note

• The printer performs image quality processing in 

accordance with the current paper type setting. 

Configuration of [Image Quality] settings on the control 

panel also is required when using paper of poor texture, 

such as some types of thick paper or business card 

paper. For information about image quality and 

configuring settings, refer to the ‘User Guide’.

• The print paper type also can be changed with the print 

driver when printing. For the procedure, refer to the 

‘User Guide’.

Setting the Paper Sizes of Trays 

1 through 4

Use the following procedure when configuring 

custom paper size settings for trays 1 through 4. 

Note

• If you changed the paper loaded in a tray from custom 

size paper to standard size paper, select [Auto] in Step 

9, below. Doing so allows the printer to automatically 

detect the type of the paper loaded in each paper tray. 

1.

On the control panel, press the